Technical Information: measurement range: 0.3-70 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.125 ml/ pulse (interpolation factor 16)

Technical Information: measurement range: 0.03-20 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.025 ml/ pulse (interpolation factor 16)

Gear metering pump with delivery volume of 2.897 ccm/ turn (effektive) Allowable inlet pressure [bar]: max. 100 Allowable outlet pressure [bar]: max. 200 Allowable drive torque [Nm]: max. 57 (referred to meachanical strength of the pump) Stuffing box tightening torque [Nm]: max. 11 Very high dosing precision

Gear metering pump with delivery volume of 1.17 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 180 Shaft seal: stuffing box Optimised for start-stop dosing Very high dosing precision Easy maintenance by stuffing box replacement

Gear metering pump with delivery volume of 10.0 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 200 Shaft seal: stuffing box Optimised for start-stop dosing Very high dosing precision Easy maintenance by stuffing box replacement

Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Piston pump for high viscosity (paste-like) materials Temperature range up to 200 C° Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for B-component Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Piston pump for low viscosity (liquid) materials Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for A-component Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Gear metering pump with delivery volume of 1.2 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 200 Shaft seal: stuffing box Very high dosing precision Easy maintenance by stuffing box replacement

Technical information: pneumatically adjustable stainless steel

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Technical Information: Pressure transmitter with output signal E = 4..20 mA Autozero function with magnetic pen - Reset the sensor to 0, after installation with the solenoid! Material: stainless steel The appropriate M12 connector must be ordered separately - item number 0004-0001-1828

Technical Information: 3 switches Diameter body-housing 100 mm 0-400 bar Connection G 1/2 at the bottom

Following plate 20 l drum (20 l Hobbock)

Seal kit for piston pump version 2000-0220-0000THE

Technical data: pneumatically adjustable stainless steel

Seal kit for gear metering pump version 2206-100D-D000

Seal kit for piston pump version 2000-0220-0000SI

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (stainless steel) with centre-fed for B-component; recommended for silicone 2 x O-ring 4 x screw for mounting at the material valve

2 pieces barrel seals / follower plate seals1 piece 0005-0008-0045O = upper ring1 piece 0005-0008-0045U = lower ring For 200 L steel drums To be mounted on the 200L follower plate Assembly with prefabricated hose clamps

Seal kit for piston pump version 2000-0220-0000F

Seal kit for piston pump version 2000-0220-0000