Technical Information: measurement range: 0.3-70 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.125 ml/ pulse (interpolation factor 16)

Technical Information: measurement range: 0.03-20 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.025 ml/ pulse (interpolation factor 16)

Rotating Cavity Pump/ Progessive Cavitiy Pump, valve-free, self-priming, almost pulsation free Suitable for low and highly viscous products with/ without solid-content Suitable for shear-sensitive, abrasive, non-smearing substances, thixotropic and dilatant Inlet pressure standard: max. 10 bar; differential pressure up to 48 bar, standard; higher pressure possible Delivery volume from less ml/h up to 400 m3/h Shaft sealing depending on product, stuffing-box, single-/ double mechanical seals, magnetic-coupling

Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Content: Desiccant reservoir comfort aluminium version with connection G 3/4" Desiccant reservoir will be delivered completely filled with SILICA GEL (around 0.6 kg). Color indicator ORANGE -> GREEN (color may differ depending on refill products)

Technical Information: Pressure transmitter with output signal E = 4..20 mA Autozero function with magnetic pen - Reset the sensor to 0, after installation with the solenoid! Material: stainless steel The appropriate M12 connector must be ordered separately - item number 0004-0001-1828

Content: Desiccant reservoir comfort with connection G 3/4" Desiccant reservoir will be delivered completely filled with SILICA GEL (around 0.5 kg). Color indicator ORANGE -> GREEN (color may differ depending on refill products)

Content: gravity tank 2l 3/8" (outside) height 28cm / diam. 12.6cm

Content: gravity tank 0.6l M16x1.5 (in.) height 15.7cm / diam. 15.7cm

For material valves version: 0001-9800-0000 and 0001-9450-0000

For 2-component valve 0001-9450-0000.

For 2C material valve version 0001-9800-0000.

Content: gravity tank 6l M36x2 (in.) height 35cm / diam. 24.3cm

Technical data: Cable socket angled M12 For pressure transducer version 0004-0032-1005

Lubricant to refill the oil cup from piston pumps and proportioning pumps after the weekly cleaning process. It can also be used as lubricant for the following plate sealings.

Synonyms: Adsorbents, Silica gel, Drying beads, Desiccant Silica gel Indicator Orange-GreenGranules: 3-5 MMPlastic Bottle 750 mlIdentification of the SubstanceChemical product name: Silicon dioxideCAS-Number: 112926-00-8CAS Numbers:≥99% Silicon dioxide SiO2 7631-86-91% Copper Cu 7440-50-8≤1% Water H2O 7732-18-5