Technical Information: measurement range: 0.3-70 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.125 ml/ pulse (interpolation factor 16)

Technical Information: measurement range: 0.03-20 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.025 ml/ pulse (interpolation factor 16)

Rotating Cavity Pump/ Progessive Cavitiy Pump, valve-free, self-priming, almost pulsation free Suitable for low and highly viscous products with/ without solid-content Suitable for shear-sensitive, abrasive, non-smearing substances, thixotropic and dilatant Inlet pressure standard: max. 10 bar; differential pressure up to 48 bar, standard; higher pressure possible Delivery volume from less ml/h up to 400 m3/h Shaft sealing depending on product, stuffing-box, single-/ double mechanical seals, magnetic-coupling

Optional for mastermix-LV-series Content: Material: galvanized steel Max. working pressure 6 bar Model without stirring device Ascension pipe with on top ball valve 3/8" stainless steel for material withdrawal Cubic capacity 90.0 litre Diameter approx. 438 mm Height depending on stirring device max. approx. 1280 mm Tank on base ring Pressure tank options on request: Version incl. electrically operated stirring device Version incl. pneumatic operated stirring device Pressure tank in stainless steel Pressure tank in vacuum version Heating sleeve for pressure tanks Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Gear metering pump with delivery volume of 2.897 ccm/ turn (effektive) Allowable inlet pressure [bar]: max. 100 Allowable outlet pressure [bar]: max. 200 Allowable drive torque [Nm]: max. 57 (referred to meachanical strength of the pump) Stuffing box tightening torque [Nm]: max. 11 Very high dosing precision

Gear metering pump with delivery volume of 1.17 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 180 Shaft seal: stuffing box Optimised for start-stop dosing Very high dosing precision Easy maintenance by stuffing box replacement

Gear metering pump with delivery volume of 10.0 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 200 Shaft seal: stuffing box Optimised for start-stop dosing Very high dosing precision Easy maintenance by stuffing box replacement

Optional for mastermix-LV-series Heating sleeve for pressure tank 0006-0060-1200 120.0 litre Content: For all pressure tanks we have different sizes of heating sleeves for temperature up to max. 100 °C - Attention: standard tanks max. heating up to 50 °C pressure tanks for 100 °C on request One-piece dagged PTFE glass fabric material - 25 mm thickness Hook-and-loop fastener Temperature sensor PT100 integrated Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Piston pump for high viscosity (paste-like) materials Temperature range up to 200 C° Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for B-component Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Piston pump for low viscosity (liquid) materials Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for A-component Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Option for pressure tank 0006-0060-0120 11.8 litre Content: All pressure tanks can be produced with elec. gear motor agitator Power 0.12 kW, 230/400V approx. 60/1min (0.18 kW and 99/1min with 120 litre tank) Fittings, drive shaft and stirrer made of stainless steel 1.4301 Explosion-proof version according German RL 94/9 EG Kennzeichnung (see German description) Offer after detailed technical specification of the project requirements.The pressure tank is not included in this item number. For further details please check our brochure "Optional for mastermix-LV-series"

Gear metering pump with delivery volume of 1.2 ccm/ turn Inlet pressure [bar]: max. 50 Operating pressure [bar]: max. 200 Shaft seal: stuffing box Very high dosing precision Easy maintenance by stuffing box replacement

Option for pressure tank 0006-0060-0120 11.8 litre Content: All pressure tanks can be produced with pneumatic gear motor agitator Power 0.36 kW, max. 200/1min Two stage gear box Fittings, drive shaft and stirrer made of stainless steel 1.4301 Explosion-proof installation according German Explosionsschutzrichtline 94/9/EG (ATEX-Richtlinie) Geeignet für Betrieb in Zone 1 ( II 1/2 G c T4, Ex-Kategorie 2 ) Offer after detailed technical specification of the project requirements. The pressure tank is not included in this item number. For further details please check our brochure "Optional for mastermix-LV-series"

Content*: Incl. temperature controller and Schuko plug Improved processing of pasty materials Operating temperature: 100 °C Inner diameter: 265/280 mm / length: 370 mm at version for 20 l Length x height 1840 mm x 880 mm at version 200 l With mounted electronic regulator / limiter Indicator lights for mains, operation and malfunction Power supply: 2.0m long with Schuko plug Rated capacity: 400W and Nominal voltage: 230 V AC at version 20 l Rated capacity: 950W and nominal voltage: 230 V AC at version 200 l Version: moisture-proof, earthed *Shown pictures may differ from original product

Displacement pump / reciprocating pump For high viscosity (paste-like) materials Mixing ratio adjustable depending on rocker setup from 13:1 to 7:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Displacement pump / reciprocating pump Used for high viscosity (paste-like) materials and also for low viscosity (liquid) materials Suitable also for isocyanate Mixing ratio adjustable depending on rocker setup from 13:1 to 7:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Technical information: pneumatically adjustable stainless steel

Set complete pre-assembled consisting of: compactmix 13 mm (2001-1015-0000) with 3 stainless-steel mixing sections 13mm (dismountable for easy cleaning process) for polyurethane, silicone and polysulfide materials Sealing gun (0001-9990-0000) Z-swivel joint (0001-9981-0000A) Material joint with seperate mixing element with premixing chamber and fittings

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Displacement pump / reciprocating pump Used for high viscosity (paste-like) materials and also for low viscosity (liquid) materials Suitable also for isocyanate Mixing ratio adjustable depending on rocker setup from 7:1 to 3.5:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Set complete pre-assembled consisting of: compactmix 13 mm (2001-1015-0000) with 3 stainless-steel mixing sections for polyurethane, silicone and polysulfide materials Demountable for cleaning Sealing gun (0001-9990-0000) Z-swivel joint (0001-9981-0000A) Material joint and fittings