Static mixer Nordson 7701038 161-236
Price on request
Available stock: 20450
Product number: 0001-9998-1236
Manufacturer product number: 7701038 161-236
Weight: 0.051 kg
Pictures may differ from original product
Product information "Static mixer Nordson 7701038 161-236"
A metal protective pipe for the mixers is recommended if the working pressure inside the nozzle exceeds 10 bar (150 psi).
Specification
- Elements: Acetal
- Housing: Polypropylene
Accessories
- Material Valves for Hand-held or stationary Unit’s with electric or pneumatic Handles
- Material Joints in different Versions
- Ratio Check Cap and Night Cap
- Retaining Nut
- Protective Pipe
Properties "Static mixer Nordson 7701038 161-236"
| Delivery Time: | incoming status / on request |
|---|---|
| Element Diameter (mm): | 12,65 |
| Housing Inlet: | Bell 16.7mm |
| Housing Length (cm): | 42,24 |
| Housing Outlet: | stepped |
| Material: | plastic |
| Mixer Technology: | Spiral Mixer |
| Nordson EFD: | 7701038 (161-236) |
| Number of Mixing Elements: | 36 Mixing Elements |
| Outlet Tip Orifice (mm): | 4,57 |
| Outside Diameter (mm): | 16.76 |
| Pressure Limit (Bar): | 19 Bar |
| Spare Part Filter: | Dosing and Mixing |
| Units / Box: | 250 pcs (Units / Box) |
Similar
3 piece(s) in stock
Metal nozzle 1/4" NPT Outside Diameter 2.11mm - pipe length 42.55mm
Specification:Metal nozzles for disposable mixersPrecision dispensing needles made of metal 1/4" NPT external thread Hub: nickel plated brass (9/16" HEX) / Tube: stainless steel Inside diameter 1.6mm Outside diameter 2.11mm Overall length 61.35mm
Product number: 0001-9994-14-02X043
€67.62*
4 piece(s) in stock
Metal nozzle 1/4" NPT Outside Diameter 4.19mm - pipe length 42.55mm
Specification:Metal nozzles for disposable mixersPrecision dispensing needles made of metal 1/4" NPT external thread Hub: nickel plated brass (9/16" HEX) / Tube: stainless steel Inside diameter 3.4mm Outside diameter 4.19mm Overall length 61.35mm
Product number: 0001-9994-14-04X043
€67.62*
Protective pipe for mixer 0001-9998-1236
The protective pipe is used to attach static mixers to the t-s-i.de material joints.
It ensures a clean connection and thus prevents material from leaking between the material joint and the mixer.
It also serves as a guide for the mixer in order to compensate for its elastic behavior and any shape deviations, which can be particularly problematic with long mixers.
Attention: Only tighten hand-tight and without tools!
Thin-walled construction for low weight and easy handling
Available in different versions for different mixers
Compatible with t-s-i.de material joints
Product number: 0001-9998-0042
€92.79*
Protective pipe with external thread for mixer 0001-9998-1236
The protective pipe is used to attach static mixers 0001-9998-1236 to the t-s-i.de material joints.
It ensures a clean connection and thus prevents material from leaking between the material joint and the mixer.
It also serves as a guide for the mixer in order to compensate for its elastic behavior and any shape deviations, which can be particularly problematic with long mixers.
Additionally, there is an outer thread at the tip of 0001-9998-0200 to connect the following adapters:
2000-0306-1004T (Adapter rubber nozzle)
2000-0306-1005T (Adapter male thread M15x1,5)
2000-0306-1011T (Adapter male cartridge coarse thread S15)
2000-0306-1012T (Adapter female thread 1/4" NPT)
Attention: Only tighten hand-tight and without tools!
For use with mixer 0001-9998-1236
Additional outer thread to use nozzles with t-s-i.de adapters
Thin-walled construction for low weight and easy handling
Available in different versions for different mixers
Compatible with t-s-i.de material joints
Product number: 0001-9998-0200
€139.23*