Two-component mixing and metering gear pump system for robot connection. The mastermix gear drive robot is a gear pump metering system, especially designed to process fast curing 2-component materials with robots or linear systems. The systems high accuracy of dosing allows the usage of disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum. Short amortisation of investment is the result of the high costsaving potential of this system. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V+N+PE/ 3.8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm weight approx. 620 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotors digital pressure sensors dead volume-free construction optical and acoustic pot life control signal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate two hand safety control for A- and B-side drum shortage control with pump stop maintenance free pump sealing system manual dosage control variably adjustable mixing ratio 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Aditional equipment: other drum sizes on request following plate heating A-component and B-component cartridge filling unit (1c and 2c) park position with automatic purging permanent mixing ratio control with volume measuring cells working-hose prolongation special painting on request Further options please find in our brochure "Optional for mastermix series" or on request.  

One-component gear metering system to process material out of 200 litre drums. The monoflow gear drive 200 is a servo motor-controlled precision gear metering system designed for processing single-component adhesives and sealants from 200-liter drums. The system's excellent dosing accuracy makes it suitable for a wide range of applications, providing controlled, reproducible metering performance for consistent production quality. For certain materials, an eccentric screw pump can be used as an alternative to the gear metering pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1150 x 1000 x 1800 mm standard hose length 2500 mm weight approx. 400 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotor digital pressure sensors for monitoring supply and working pressure material shortage control overpressure safety device 200 l residual materials optimized following plate two-hand safety control drum empty control with pump stop piston pump maintenance free pump sealing system gear pump material valve optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 200l drum swivel arm systems working-hose prolongation special painting cartridge filling unit (1c) Tandem design for uninterrupted operation more options on request

One-component gear metering system to process material out of 20 litre hobbocks. The monoflow gear drive 20 is a servo motor-controlled precision gear metering system designed for processing single-component adhesives and sealants from 20 litre hobbocks. The high accuracy system of dosing allows usage for a vast spectrum of different applications and provides a solid, controlled, and reproducible dosing performance for consistent production quality. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1110 x 660 x 1700 mm standard hose length 2500 mm weight approx. 300 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotor digital pressure sensors for monitoring supply and working pressure material shortage control overpressure safety device two-hand safety control drum empty control with pump stop 20 l following plate piston pump maintenance free pump sealing system gear pump material valve *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 20l drums swivel arm system working-hose prolongation special painting cartridge filling unit (1c) Tandem design for uninterrupted operation more options on request