Content*: Base frame for dual material feed from the A- and B-side; enables the drum to be changed without machine downtime Second A-side 20l / 50l / 200l Second B-side 20l / 50l / 200l Additional needed modules for S7 PLC Software modification *Content and prices for backfitting may differ

Content*: 2 x volume measuring cells for A and B component 2 x Siemens counter modules Incl. projection, installation and start-up settings For certain materials, alternative linear measurement systems are used instead of volume measuring cells for mixing ratio monitoring (stroke monitoring of the piston pumps). *Content and prices for backfitting may differ

Yearly preventive maintenance for your mixing and dosing machine(s). Preventive maintenance helps to minimize downtimes and increase operational safety. A maintenance contract will cover the complete history of your machine, which facilitates forwardlooking and efficient service. In the long run you save downtime costs and enhance the overall technical availability of your equipment. Your advantages at a glance: 15% discount on labor costs and travel expenses; 15% discount on spare parts, which are installed during the maintenance operation or which are ordered on the day of the maintenance work; Increased availability of the equipment and process safety; Faults are identified in due time, thus reducing the unscheduled machine downtimes; Advisory services provided by the t-s-i.de service technician regarding the procurement and stocking up of spare parts; Regular exchange with t-s-i.de (exchange of experience, further technical developments, etc.); Permanent development of know-how in your organization; Reduction of your labor costs; High operating safety.

Semi-automatic 1c and 2c cartridge filling system powerd by compressed air This independent cartridge filling system can either fill semi-automatically 310ml aluminum or PE cartridges. The machine operator can fill one component product or two component product materials depending on the needs. The filling level of the cartridges can be freely selected. After expiration of the pot life the precipitation of the mixer is prevented by automatic purging.Cartridge filling can only be used in conjunction with a mixing and dosing system. Technical data: powered pneumatic dimensions l x w x h 600 x 700 x 1600 mm weight approx. 78 kg more options on request

Unit for freezing and defrosting sealants and adhesives with complete mixing sets Mixed 2-component sealants and adhesives have the characteristic to vulcanise slower at lower temperatures. With polysulfide and polyurethane the reaction stops at a temperature of - 25 °C, silicon reacts more slowly at a temperature of - 40 °C and lower. Freezing is an environmentfriendly and economic method in case of production interruptions. Technical data: power supply 230 V/ 50 Hz/ 1000 W temperature freezing -25 °C to -45 °C quantity cooling liquid 18 l temperature defrosting +50 °C diameter containers 175 x 1000 mm dimensions l x w x h 910 x 500 x 1150 mm weight (without liquids) approx. 70 kg article number 2000-0002-F1 Advantages:This procedure hinders polymerization of the mixed material due to cooling down on low temperatures. The material can be processed normally after defrosting on temperatures between 20 °C and 50 °C. Please observe the freezing temperature and time specific for each material.material saving, no jetting of the mixing pipe with A component necessarysolvents for cleaning the mixing pipe are unnecessary Typical freezing parameters: polysulfide at -25 °C some weeks polyurethane at -28 °C some days silicon at -40 °C approx. 60 hours more options on request  

Content*: Worm-gearing-mixer for 1000 litre IBC container and materials up to 20000 m/Pas (viscosity information subject to detailed material control and testing (material sample)) Power: 2,2 KW RPM: 0-270 Voltage: 3PH 400V 50/60HZ / IE2 Material in contact with product: 1.4571 or 1.4404 stainless steel (V4A) Brand: Getriebebau NORD Solid agitator shaft D 40mm Cup-mixer with 2 arms D=600mm (will fit in opening D=140mm) Incl. compact frequency inverter IP 55 and potentiometer for speed control Stainless steel support (1.4301) with 2 forklift openings, 2 clamping grips and 2 carry handles *Content, price and item number may differ, depending on density and viscosity of the processed material

Content: (A+B) Length measuring system for A- and B-component C) 2 pcs. digital pressure transducer deadvolume free (pressure gauge at the panel) (D) Control panel Siemens SIMATIC HMI KTP600 Basic mono PN For mastermix XS/XL (2K) Incl. projection, installation and start-up settings *Content and prices for backfitting may differ  

Content*: Worm-gearing-mixer for 1000 litre IBC container and materials up to 2000 m/Pas (viscosity information subject to detailed material control and testing (material sample)) Power: 0,75KW RPM: 0-190 Voltage: 3PH 400V 50/60HZ Material in contact with product: 1.4571 or 1.4404 stainless steel (V4A) Brand: Getriebebau NORD Solid agitator shaft D 28mm x 900mm with 4 retractable vanes D=340mm screwed at the end of the shaft (will fit in opening D=140mm) Incl. compact frequency inverter IP 55 and potentiometer for speed control Stainless steel support (1.4301) with 2 forklift openings, 2 clamping grips and 2 carry handles *Content, price and item number may differ, depending on density and viscosity of the processed material

Content: Capacity max. 300 kg / weight 123 kg Width 1045 mm, height 1305 mm, length 890 mm Lift from top of holding bracket 533-1088 mm Barrel size 200 liters / 600 mm Ø Holding brackets opens and closes automatically Drive over Euro-palette from smaller width side Polyamid wheels Colors might be different from the product imageBase frame: black-grey according to RAL 7021Lifting frame/drum clamp/drawbar: black-grey according to RAL 7021Fairing light reddish-orange: according to RAL 2008 Backfitting is not possible, please inform us with the machine order, if you want to use a drum lifter to load the machine.

Pneumatic pump system to clean complete mixing-sections without dismounting This purging pump is a compact mobile system, to purge different kinds of mixers and mixing sets. The installation to the material joint of your mixing and metering unit enables the cleaning of the complete mixing set without dismantling. Technical data: transmission ratio 33 : 1 powered pneumatic compressed air requirement 6-8 bar; max. 100 l/min.(just during scavenging time) dimensions l x w x h approx. 350 x 350 x 780 mm weight without purging liquid approx.12 kg Advantages: increases operating life of your mixing sets avoids material loss reduces waste costs more options on request

Content*: Barcode scanner Power supply Connecting cable Holder and small assemby parts *Content and prices for backfitting may differ

Content: Special frame (bigger baseplate), because the B-barrel will be positioned on the baseplate 200l barrel pump 2 pcs lifting columns for 200 liter barrels Connection desiccant reservoir Incl. small parts for assembly *Content and prices for backfitting may differ

Content: Special frame (bigger baseplate), because the B-barrel will be positioned on the baseplate 200l barrel pump 2 pcs lifting columns for 200 liter barrels Incl. small parts for assembly *Content and prices for backfitting may differ

Content*: IBC-propellermixer up to 600 m/Pas (viscosity information subject to detailed material control and testing (material sample)) Power: 0,75KW RPM: 0-1500 Voltage: 3PH 400V 50/60HZ Material in contact with product: AISI316L (stainless steel) Shaft length: 1050mm 3-blade-mixing propeller D=138mm screwed at the end of the shaft Incl. compact frequency inverter IP 54 and potentiometer for speed control Stainless steel support with 2 forklift openings (AISI304), 2 clamping grips and 2 carry handles *Content, price and item number may differ, depending on density and viscosity of the processed material

Optional for mastermix-LV-series Content: Material: galvanized steel Max. working pressure 6 bar Model without stirring device Ascension pipe with on top ball valve 3/8" stainless steel for material withdrawal Cubic capacity 90.0 litre Diameter approx. 438 mm Height depending on stirring device max. approx. 1280 mm Tank on base ring Pressure tank options on request: Version incl. electrically operated stirring device Version incl. pneumatic operated stirring device Pressure tank in stainless steel Pressure tank in vacuum version Heating sleeve for pressure tanks Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Content*: Conversion kit for hydraulic systems from a 20 liter hobbock to a 200 liter drum Backfitting depending on machine frame might be not possible, please inform us with the machine order, if you plan to use this option *Content and prices for backfitting may differ

Content*: An additional switch on the gun can be used to activate two different discharge rates. Option for mastermix 2K or mastermix XS 2K Rocker switch, material pressure reg., pneumatics *Price for backfitting will be plus assembly costs

Content*: 4 x 25A + PE / wrap length 30 m Arrangement horizontal / protection class IP 66 Drum body and discs steel sheet coated Incl. backstop (can be switched off) Incl. mounting foot and line stopper Reelable cable PUR-HF 5 G 2.5mm² CEE coupling 400V / 16 A at consumer side *Content and prices for backfitting may differ

Content: Collecting tray for container with 1000 litre capacity L x W x H: 1300 x 1100 x 850mm Material S235JR acc. DIN EN 10025 3 mm material thickness / galvanized Incl. gratings footprint 1286x1012mm Base to cross underground height of 100 mm Load capacity grating 1200kt / m² - total 1500kg Acc. StawaR identification marking

Content*: Heat exchanger with adjustable thermostat Max. static operating pressure: 20 bar; test pressure: 35 bar Dimensions l x w x h: 340 x 220 x 358 mm *Content and prices for backfitting may differ

Content*: For series mastermix XS / XL More versions on request *Content and prices for backfitting may differ

Optional for mastermix-LV-series Heating sleeve for pressure tank 0006-0060-1200 120.0 litre Content: For all pressure tanks we have different sizes of heating sleeves for temperature up to max. 100 °C - Attention: standard tanks max. heating up to 50 °C pressure tanks for 100 °C on request One-piece dagged PTFE glass fabric material - 25 mm thickness Hook-and-loop fastener Temperature sensor PT100 integrated Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Option for pressure tank 0006-0060-0120 11.8 litre Content: All pressure tanks can be produced with elec. gear motor agitator Power 0.12 kW, 230/400V approx. 60/1min (0.18 kW and 99/1min with 120 litre tank) Fittings, drive shaft and stirrer made of stainless steel 1.4301 Explosion-proof version according German RL 94/9 EG Kennzeichnung (see German description) Offer after detailed technical specification of the project requirements.The pressure tank is not included in this item number. For further details please check our brochure "Optional for mastermix-LV-series"

Option for pressure tank 0006-0060-0120 11.8 litre Content: All pressure tanks can be produced with pneumatic gear motor agitator Power 0.36 kW, max. 200/1min Two stage gear box Fittings, drive shaft and stirrer made of stainless steel 1.4301 Explosion-proof installation according German Explosionsschutzrichtline 94/9/EG (ATEX-Richtlinie) Geeignet für Betrieb in Zone 1 ( II 1/2 G c T4, Ex-Kategorie 2 ) Offer after detailed technical specification of the project requirements. The pressure tank is not included in this item number. For further details please check our brochure "Optional for mastermix-LV-series"