Let Us Find the Perfect Mixing and Dosing System for You
Submit the technical data sheet of your adhesive or sealant and the packaging sizes, and we will design the ideal system for your needs.
mastermix gear drive robot
Two-component mixing and metering gear pump system for robot connection. The mastermix gear drive robot is a gear pump metering system, especially designed to process fast curing 2-component materials with robots or linear systems. The systems high accuracy of dosing allows the usage of disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum. Short amortisation of investment is the result of the high costsaving potential of this system. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V+N+PE/ 3.8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm weight approx. 620 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotors digital pressure sensors dead volume-free construction optical and acoustic pot life control signal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate two hand safety control for A- and B-side drum shortage control with pump stop maintenance free pump sealing system manual dosage control variably adjustable mixing ratio 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Aditional equipment: other drum sizes on request following plate heating A-component and B-component cartridge filling unit (1c and 2c) park position with automatic purging permanent mixing ratio control with volume measuring cells working-hose prolongation special painting on request Further options please find in our brochure "Optional for mastermix series" or on request.
Product number: 2382-0000-2000
Price on request
1 piece(s) in stock
mastermix gear drive
Two-component mixing and metering gear pump system. The mastermix gear drive is a servo-motor controlled gear pump metering system which enables the reliable processing of even the most sensible materials. The systems extreme high accuracy of dosing allows the usage of disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum.The very quick amortisation of the investment is the result of the high cost-saving potential of the system. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V+N+PE/ 3.8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard swivel arm length 1200 mm standard hose length 2500 mm weight approx. 640 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotors digital pressure sensors dead volume-free construction optical and acoustic pot life control signal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate two hand safety control for A- and B-side drum shortage control with pump stop maintenance free pump sealing system variably adjustable mixing ratio optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Additional equipment: other drum sizes on request following plate heating A-component and B-component cartridge filling unit (1c and 2c) park position with automatic purging permanent mixing ratio control with volume measuring cells working-hose prolongation special painting on request swivel arm prolongation swivel arm heightening mobile unit, with wheels Further options please find in our brochure "Optional for mastermix series" or on request.
Product number: 2382-0000-1000
Price on request
mastermix gear drive compact
Two-component mixing and metering gear pump system. The mastermix gear drive compact is a gear pump metering system especially designed for the processing of fast curing 2-component products. The highly compact system, designed for mobile application equals in performance to a standard system. The system high accuracy of dosing allows the usage of disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum. The very quick amortisation of the investment is the result of the high cost-saving potential of the system. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1200 x 800 x 2200 mm standard hose length 2500 mm weight approx. 640 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotors digital pressure sensors dead volume-free construction optical and acoustic pot life control signal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate two hand safety control for A- and B-side drum shortage control with pump stop maintenance free pump sealing system variably adjustable mixing ratio 20 l A-drum / 20 l B-drum *depending on the project, positions may differ Aditional equipment: other drum sizes on request following plate heating A-component and B-component cartridge filling unit (1c and 2c) park position with automatic purging permanent mixing ratio control with volume measuring cells working-hose prolongation special painting on request swivel arm systems mobile unit, with wheels Further options please find in our brochure "Optional for mastermix series" or on request.
Product number: 2381-0000-1000
Price on request
1 piece(s) in stock
mastermix gear basic
Two-component mixing and metering gear pump system. The mastermix gear basic is a gear pump metering system especially designed for the processing of two component silicones. As a basic version of our mastermix gear series it is uncompromisingly geared to functionality and offers gear pump metering for a favorable price. The systems precise accuracy of dosing allows the usage of disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum.Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V + N + PE/ 3.8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard swivel arm length 1200 mm standard hose length 2500 mm weight approx. 620 kgStandard equipment*: Siemens S7-1200 / ethernet-ready for integration in future automation optical and acoustic pot life control material shortage control overpressure safety device residual materials optimized following plate two hand safety control drum shortage control with pump stop maintenance free pump sealing system manual dosage control variably adjustable mixing ratio 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differAdditional equipment: swivel arm prolongation swivel arm heightening working-hose prolongation special painting B component pump for 200 l drum other drum sizes on request following plate heating A-component and B-component cartridge filling unit (1c and 2c) mobile unit, with wheels park position with automatic purging more options on request
Product number: 2342-0001-1000
€33,450.00*
mastermix LV
2 component mixing and metering unit with gear pump technology.
The mastermix LV is a two-component mixing and metering system to process low to medium viscose materials. Our special strength is to focus on our clients requirements, to design individual solutions from our large base of standard equipment. We are looking forward for your specifications.
Technical data:
outflow max. depending on material *
power supply 3 x 400 V + N + PE/50 Hz/16 A
compressed air requirement 6 bar, oil-free, dried, filtered
dimensions (l x w x h)* depending on application
weight approx.** depending on application
*depending on viscosity, temperature, batch of material etc.
Standard equipment*:
Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation
2 x SEW gearmotor, frequency-controlled
2 x gear pump
digital pressure sensors
overpressure safety device
material shortage control
pot life control with visual and audible warning signal
signal lamp to provide a visual alert for system messages
2 x storage tank approx. 26 litre
digital fill level control of storage tank
2c material valve
*depending on the application, positions may differ
Additional equipment:
material supply system*
heated material hoses
mobile underframe
hose elongations
flow rate control
frames and collecting tanks for drums or IBC-container
storage tanks in special sizes (project-specific)
different versions of application units and valves
* the design of the material supply is adapted to the intended use and to each individual client.
more options on request
Product number: 22262-0001-1000
Price on request
mastermix XS 2K
Hydraulic 2-component mixing and metering unit with 2-c gun to use one way mixer. The mixing and metering units of the mastermix-series are solid and powerful machines, which fulfil all requirements of the processing of two component adhesives and sealants in a superior way. The mastermix XS 2C has been especially designed for materials that could be processed via disposable plastic mixers. Thereby the loss of material due to base purging, as well as the costs for consumables and spare parts, are reduced to a minimum. Technical data: output depending on viscosity, temperature, batch of material etc. propulsion A-side hydraulic propulsion B-side pneumatic power supply 3 x 400 V + N + PE/ 3.8 kW compressed air requirement 6 bar, 50 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard swivel arm length 1900 mm standard hose length 2500 mm weight approx. 600 kg Standard equipment*: Siemens S7-1200 / ethernet-ready for integration in future automation optical and acoustic pot life control material shortage control overpressure safety device residual materials optimized following plate two hand safety control drum shortage control with pump stop maintenance free pump sealing system dosage control variably adjustable mixing ratio 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) 2 component mixing valve *depending on the project, positions can differ Additional equipment: swivel arm prolongation swivel arm heightening working-hose prolongation special painting B component pump for 200 l drum other drum sizes on request following plate heating A-component cartridge filling unit (1c and 2c) mobile unit, with wheels park position with automatic purging collecting tank for hydraulic unit more options on request
Product number: 2222-0003-1000
€26,850.00*
mastermix XL
Hydraulic two-component mixing and metering unit The mixing and metering units of the mastermix-series are solid and powerful high-tech machines. They fulfil all requirements of the processing of the two-component adhesives and sealants in a superior way. By using only selected high quality components of well-known German manufacturers and due to the extensive standard equipment, the mastermix-series live up to the highest grades. Technical data: outflow max. 6000 g/min.* A-side powered hydraulic B-side powered pneumatic power supply 3 x 400 V + N + PE/ 4,5 kW compressed air requirement 6 bar; 70 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard swivel arm length 1900 mm standard hose length 2500 mm weight approx. 650 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / ethernet-ready for integration in future automation optical and acoustic pot life control material shortage control overpressure safety device residual materials optimized following plate two hand safety control drum shortage control with pump stop maintenance free pump sealing system dosage control variably adjustable mixing ratio base purging available 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions can differ Additional equipment: swivel arm prolongation swivel arm heightening working-hose prolongation special painting B component pump for 200 l drum other drum sizes on request following plate heating A-component cartridge filling unit (1c and 2c) mobile unit, with wheels collecting tank for hydraulic unit more options on request
Product number: 2232-0001-2000
€25,850.00*
%
mastermix XS
Hydraulic two-component mixing and metering unit The mixing and metering units of the mastermix-series are solid and powerful high-tech machines. They fulfil all requirements of the processing of the two-component adhesives and sealants in a superior way. By using only selected high quality components of well-known German manufacturers and due to the extensive standard equipment, the mastermix-series live up to the highest grades. Technical data: outflow max. 3500 g/min.* A-side powered hydraulic B-side powered pneumatic power supply 3 x 400 V + N + PE/ 3,8 kW compressed air requirement 6 bar; 50 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard swivel arm length 1900 mm standard hose length 2500 mm weight approx. 520 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / ethernet-ready for integration in future automation optical and acoustic pot life control material shortage control overpressure safety device residual materials optimized following plate two hand safety control drum shortage control with pump stop maintenance free pump sealing system dosage control variably adjustable mixing ratio base purging available 200 l A drum / 20 l B drum optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions can differ Additional equipment: swivel arm prolongation swivel arm heightening working-hose prolongation special painting B component pump for 200 l drum other drum sizes on request following plate heating A-component cartridge filling unit (1c and 2c) mobile unit, with wheels collecting tank for hydraulic unit more options on request
Product number: 2222-0001-2000
€22,000.00* €22,850.00* (3.72% saved)
%
ecomix XS
Hydraulic two-component mixing and metering unit.
The ecomix XS is a solid and powerful mixing and metering unit, which is uncompromisingly geared to functionality. Special attention has been paid to maintainability and robustness by choosing German quality components only. The ecomix XS combines well proven technology with an unbeatable cost/performance ratio.
Technical data:
outflow max. 3500 g/min.*
A-side powered hydraulic
B-side powered pneumatic
power supply 3 x 400 V + N + PE/ 3,8 kW
compressed air requirement 6 bar; 50 l/min.
dimensions l x w x h 1250 x 1000 x 2300 mm
height with swivel arm 2300 mm
standard swivel arm length 1500 mm
standard hose length 2500 mm
weight approx. 540 kg
*depending on viscosity, temperature, batch of material etc.
Standard equipment*:
Siemens relay control
optical and acoustic pot life control
material shortage control
overpressure safety device
residual materials optimized following plate
two hand safety control
drum shortage control with pump stop
maintenance free pump sealing system
dosage control
variably adjustable mixing ratio
base purging available
200 l A drum / 20 l B drum
*depending on the project, positions can differ
Additional equipment:
following plate heating A-component
purging pump to clean the mixer
mobile unit, with wheels
Product number: 2252-0013-1000
€19,000.00* €19,950.00* (4.76% saved)
Lorem Ipsum dolor sit amet
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.