Mixing and metering system for accelerated 1c-adhesives with admixed water-paste. This strong and robust high performance unit was especially developed for requirements of modern booster materials. The infinitely adjustable mixing ratio is permanently controlled by a PLC-unit. The B-component (booster) can alternatively be processed from 600 ml foil, 310 ml and 1000 ml cartridges or 20 l hobboks. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V+N+PE/ 3,8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard hose length 2500 mm weight approx. 490 kg Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation optical and acoustic pot life controlsignal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate drum shortage control with pump stop maintenance free pump sealing system permanent mixing ratio control variably adjustable mixing ratio in the range of 100 : 1 to 100 : 10 base purging possible 200 l A drum / B-component alternatively from 600ml foil, 310 ml or 1000 ml cartridges or 20 l hobbock B-component with gear pump driven by servomotor *depending on the project, positions may differ optional equipment: material pressure regulator for pulsation reduction for A-component swivel arm prolongation swivel arm heightening working-hose prolongation special painting other drum sizes on request cartridge filling unit (1c and 2c) mobile unit, with wheels more options on request

One-component gear metering system to process material out of 200 litre drums. The monoflow gear drive 200 is a servo motor-controlled precision gear metering system designed for processing single-component adhesives and sealants from 200-liter drums. The system's excellent dosing accuracy makes it suitable for a wide range of applications, providing controlled, reproducible metering performance for consistent production quality. For certain materials, an eccentric screw pump can be used as an alternative to the gear metering pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1150 x 1000 x 1800 mm standard hose length 2500 mm weight approx. 400 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotor digital pressure sensors for monitoring supply and working pressure material shortage control overpressure safety device 200 l residual materials optimized following plate two-hand safety control drum empty control with pump stop piston pump maintenance free pump sealing system gear pump material valve optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 200l drum swivel arm systems working-hose prolongation special painting cartridge filling unit (1c) Tandem design for uninterrupted operation more options on request

Mixing and metering system for accelerated 1c-adhesives with admixed water-paste. This strong and robust high performance unit was especially developed for requirements of modern booster materials. The infinitely adjustable mixing ratio is permanently controlled by a PLC-unit. The B-component (booster) can alternatively be processed from 600 ml foil, 310 ml and 1000 ml cartridges or 20 l hobboks.Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic B-side powered pneumatic power supply 3 x 380 V+N+PE/ 3,8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 850 x 600 x 1600 mm standard hose length 2500 mm weight approx. 300 kg Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation optical and acoustic pot life controlsignal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate drum shortage control with pump stop maintenance free pump sealing system permanent mixing ratio control variably adjustable mixing ratio in the range of 100 : 1 to 100 : 10 base purging possible 20 l A drum / B-component alternatively from 600ml foil, 310 ml or 1000 ml cartridges or 20 l hobbock B-component with gear pump driven by servomotor *depending on the project, positions may differoptional equipment: material pressure regulator for pulsation reduction for A-component working-hose prolongation special painting other drum sizes on request cartridge filling unit (1c and 2c) mobile unit, with wheels more options on request

One-component gear metering system to process material out of 20 litre hobbocks. The monoflow gear drive 20 is a servo motor-controlled precision gear metering system designed for processing single-component adhesives and sealants from 20 litre hobbocks. The high accuracy system of dosing allows usage for a vast spectrum of different applications and provides a solid, controlled, and reproducible dosing performance for consistent production quality. For certain materials, an eccentric screw pump can be used as an alternative to the gear pump. Technical data: outflow depending on viscosity, temperature, batch of material etc. A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1110 x 660 x 1700 mm standard hose length 2500 mm weight approx. 300 kg Standard equipment*: Siemens S7-1500 / touch panel / ethernet-ready for integration in future automation Software interface is prepared to control automation (standard via Profinet; other interfaces on request) Siemens servomotor digital pressure sensors for monitoring supply and working pressure material shortage control overpressure safety device two-hand safety control drum empty control with pump stop 20 l following plate piston pump maintenance free pump sealing system gear pump material valve *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 20l drums swivel arm system working-hose prolongation special painting cartridge filling unit (1c) Tandem design for uninterrupted operation more options on request

Pneumatic mono-component sealing unit to process material out of 200 litre drums. Our hand sealing units are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard. Technical data: output depending on viscosity, temperature, batch of material etc pneumatic requirements 6 bar, 600 l/min. dimensions l x w x h 1000 x 1150 x 1800 mm weight approx. 450 kg Standard equipment: 2.5 m water-vapour tight high pressure teflon hose 2 lifting columns high pressure sealing gun Additional equipment: sealing gun Ultra-Light material pressure regulator for pulsation reduction drum empty control with pump stop heated following plate mobile unit on wheels autarkic cartridge filling unit swivel arm systems more options on request

Pneumatic mono-component sealing unit to process material out of 20 litre hobbocks. Our hand sealing units are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard. Technical data: output max. depending on viscosity, temperature, batch of material etc. pneumatic requirements 6 bar, 600 l/min. dimensions l x w x h 600 x 400 x 1300 mm weight approx. 250 kg Standard equipment: 2.5 m water-vapour tight high pressure teflon hose 2 lifting columns high pressure sealing gun mobile unit on wheels Additional equipment: sealing gun Ultra-Light material pressure regulator for pulsation reduction drum empty control with pump stop autarkic cartridge filling unit teflon-coated following plate more options on request