Bonding unit for hotmelt or reactive hotmelt to process material out of 200 litre drums. The monoflow 200 thermo unit is especially developed for usage of hotmelt and reactive hotmelt. This is the right model for those who start up with hand application. It can easily be integrated into a semi or fully automatic machine later on, depending on your requirements. Technical data: outflow max. 2500 g/min.* compressed air requirement 6 bar, 600 l/min. power supply 3 x 400V+N+PE/ approx. 3 kW dimensions l x w x h 1500 x 1000 x 1800 mm weight approx. 600 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation 5 heating circuits (following plate, pump, back pressure regulator, hose, gun) 4 m heated high pressure hose (water vapour diffusing resistant) signal light (visual alert for system messages) material shortage control residual materials optimized following plate day and week timer pressure regulator to minimize pulsation two hand safety control *depending on the project, positions can differ Additional equipment: additional heading circuits swivel arm systems hydraulic model for higher outflow teflon-coated following plate for 200l drum working-hose prolongation special painting mobile unit, with wheels more options on request

Mixing and metering system for accelerated 1c-adhesives with admixed water-paste. This strong and robust high performance unit was especially developed for requirements of modern booster materials. The infinitely adjustable mixing ratio is permanently controlled by a PLC-unit. The B-component (booster) can alternatively be processed from 600 ml foil, 310 ml and 1000 ml cartridges or 20 l hobboks. Technical data: outflow max. approx. 2000 g/min.* A-side powered pneumatic B-side powered pneumatic power supply 3 x 400 V+N+PE/ 3,8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 1500 x 1000 x 1800 mm height with swivel arm 2500 mm standard hose length 2500 mm weight approx. 490 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation optical and acoustic pot life controlsignal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate drum shortage control with pump stop maintenance free pump sealing system permanent mixing ratio control variably adjustable mixing ratio in the range of 100 : 1 to 100 : 10 base purging possible 200 l A drum / B-component alternatively from 600ml foil, 310 ml or 1000 ml cartridges or 20 l hobbock B-component with gear pump driven by servomotor *depending on the project, positions may differ optional equipment: material pressure regulator for pulsation reduction for A-component swivel arm prolongation swivel arm heightening working-hose prolongation special painting other drum sizes on request cartridge filling unit (1c and 2c) mobile unit, with wheels more options on request

Mixing and metering system for accelerated 1c-adhesives with admixed water-paste. This strong and robust high performance unit was especially developed for requirements of modern booster materials. The infinitely adjustable mixing ratio is permanently controlled by a PLC-unit. The B-component (booster) can alternatively be processed from 600 ml foil, 310 ml and 1000 ml cartridges or 20 l hobboks.Technical data: outflow max. approx. 2000 g/min.* A-side powered pneumatic B-side powered pneumatic power supply 3 x 380 V+N+PE/ 3,8 kW compressed air requirement 6 bar, 600 l/min. dimensions l x w x h 850 x 600 x 1600 mm standard hose length 2500 mm weight approx. 300 kg *depending on viscosity, temperature, batch of material etc.Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation optical and acoustic pot life controlsignal light (visual alert for system messages) material shortage control overpressure safety device residual materials optimized following plate drum shortage control with pump stop maintenance free pump sealing system permanent mixing ratio control variably adjustable mixing ratio in the range of 100 : 1 to 100 : 10 base purging possible 20 l A drum / B-component alternatively from 600ml foil, 310 ml or 1000 ml cartridges or 20 l hobbock B-component with gear pump driven by servomotor *depending on the project, positions may differoptional equipment: material pressure regulator for pulsation reduction for A-component working-hose prolongation special painting other drum sizes on request cartridge filling unit (1c and 2c) mobile unit, with wheels more options on request

Bonding unit for hotmelt or reactive hotmelt to process material out of 20 litre hobbocks. The monoflow 20 thermo unit is especially developed for usage of hotmelt and reactive hotmelt. This is the right model for those who start up with hand application. It can easily be integrated into a semi or fully automatic machine later on, depending on your requirements. Technical data: outflow max. 2500 g/min.* compressed air requirement 6 bar, 600 l/min. power supply 3 x 400V+N+PE/ approx. 3 kW dimensions l x w x h 600 x 400 x 1300 mm weight approx. 250 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation 5 heating circuits (following plate, pump, back pressure regulator, hose, gun) 4 m heated high pressure hose (water vapour diffusing resistant) signal light (visual alert for system messages) material shortage control mobile unit, with wheels day and week timer pressure regulator to minimize pulsation two hand safety control *depending on the project, positions can differ Additional equipment: additional heading circuits hydraulic model for higher outflow swivel arm system teflon-coated following plate for 20l drum more options on request

One-component gear pump system to process material out of 200 litre drums (example picture with version for 20 litre hobbock). The monoflow gear 200 is a precision gear pump metering system, especially designed for processing of fast curing one-component adhesives from 200 litre drums. The high accuracy system of dosing allows the usage for a vast spectrum of different applications and provides a solid controlled and reproduceable dosing performance for a constant production quality. Technical data: outflow max. 2000 g/min.* A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1150 x 1000 x 1800 mm standard hose length 2500 mm weight approx. 400 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation digital pressure sensor optical and acoustic pot life control material shortage control overpressure safety device 200 l residual materials optimized following plate two-hand safety control drum empty control with pump stop piston pump maintenance free pump sealing system gear pump material valve optimized change of 200 litre drum (base plate with recesses for jack lift) *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 200l drum swivel arm systems working-hose prolongation special painting cartridge filling unit (1c) more options on request

One-component gear pump system to process material out of 20 litre hobbocks. The monoflow gear 20 is a precision gear pump metering system, especially designed for processing of fast curing one-component adhesives from 20 litre hobbocks. The high accuracy system of dosing allows the usage for a vast spectrum of different applications and provides a solid controlled and reproduceable dosing performance for a constant production quality. Technical data: outflow max. approx. 2000 g/min.* A-side powered pneumatic power supply 3 x 400 V + N + PE / 3,8 kW compressed air requirement 6 bar; 600 l/min. dimensions l x w x h 1110 x 660 x 1700 mm standard hose length 2500 mm weight approx. 300 kg *depending on viscosity, temperature, batch of material etc. Standard equipment*: Siemens S7-1200 / touch panel / ethernet-ready for integration in future automation digital pressure sensor optical and acoustic pot life control material shortage control overpressure safety device two-hand safety control drum empty control with pump stop 20 l following plate piston pump maintenance free pump sealing system gear pump material valve *depending on the project, positions may differ Additional equipment: mobile unit, with wheels teflon-coated following plate for 20l drums swivel arm system working-hose prolongation special painting cartridge filling unit (1c) more options on request

Pneumatic 1-component unit with cartridge filling station. Our cartridge filling system can either fill semi-automatically 310ml aluminum or PE cartridges. The filling level of the cartridges can be freely selected. The monoflow 20/200 are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard. Technical data: output max. 2500 g/min.* pneumatic requirements 6 bar, 600 l/min. power supply 1 x 240 V + N + PE / 0.5 kW *depending on viscosity, temperature, batch of material etc. Standard equipment: Cartridge filling station for 310ml cartridges 2 lifting columns for 20 litre hobbocks Additional equipment: material pressure regulator for pulsation reduction teflon-coated following plate mobile unit on wheels other cartridge sizes on request more options on request

Pneumatic 1-component unit with cartridge filling station. Our cartridge filling system can either fill semi-automatically 310ml aluminum or PE cartridges. The filling level of the cartridges can be freely selected. The monoflow 20/200 are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard.Example picture with version for 20 litre hobbock. Technical data: output max. 2500 g/min.* pneumatic requirements 6 bar, 600 l/min. power supply 1 x 240 V + N + PE / 0.5 kW *depending on viscosity, temperature, batch of material etc. Standard equipment: Cartridge filling station for 310ml cartridges 2 lifting columns for 20 litre hobbocks or 200 litre drums Additional equipment: material pressure regulator for pulsation reduction teflon-coated following plate mobile unit on wheels other cartridge sizes on request more options on request  

This Hot Melt Extruder is designed to be cost-effective and very easy in sealing of insulating glass units. Almost immediately after the application of the secondary seal the insulating glass units can be processed, due to the material properties of the Hotmelt. The processing parameters of the various Hotmelt adhesives are stored in the control panel and can be selected with the help of a predefined list in the input panel. Technical data: average production approx. 190 units /day tank capacity 20 litre outflow 0-2 kg/ min.* dimensions l x w x h 728 x 380 x 1158 mm weight approx. 100 kg power supply single phase 220/230V electrical power 13Amp/2.3kW number heating zones 4 zone *depending on viscosity, temperature, batch of material etc. Standard equipment*: steel frame, powder coated programmable control panel temperature control (under/ over temperature) material procurement monitoring programmable timer for pre-selection of preheating time cable-hose assembly with big hose cross section low-pressure gun with “Cool-touch” plastic housing gun with swivel joint for comfortable handling external gun cable fitted outside the cable-hose assembly for easy removal robust spiral spring for the protection of the cable-hose assembly mobile unit on wheels *depending on the project, positions can differ Additional equipment: pneumatic clamping table handguns for plugging the small gas filling holes precision-digital-thermometer more options on request

Pneumatic mono-component sealing unit to process material out of 200 litre drums. Our hand sealing units are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard. Technical data: output max. 2500 g/min.* pneumatic requirements 6 bar, 600 l/min. dimensions l x w x h 1000 x 1150 x 1800 mm weight approx. 450 kg *depending on viscosity, temperature, batch of material etc. Standard equipment: 2.5 m water-vapour tight high pressure teflon hose 2 lifting columns high pressure sealing gun Additional equipment: sealing gun Ultra-Light material pressure regulator for pulsation reduction drum empty control with pump stop heated following plate mobile unit on wheels autarkic cartridge filling unit swivel arm systems more options on request

Pneumatic mono-component sealing unit to process material out of 20 litre hobbocks. Our hand sealing units are very strong and powerful machines that fulfil all requirements of processing modern mono-component sealants and adhesives in a superior way. A solid construction guarantees easy handling and maintainability on a high standard. Technical data: output max. 2500 g/min.* pneumatic requirements 6 bar, 600 l/min. dimensions l x w x h 600 x 400 x 1300 mm weight approx. 250 kg *depending on viscosity, temperature, batch of material etc. Standard equipment: 2.5 m water-vapour tight high pressure teflon hose 2 lifting columns high pressure sealing gun mobile unit on wheels Additional equipment: sealing gun Ultra-Light material pressure regulator for pulsation reduction drum empty control with pump stop autarkic cartridge filling unit teflon-coated following plate more options on request