For material valves version: 0001-9800-0000 and 0001-9450-0000

suitable for grease gun 0001-9998-0031GUN for lubricating - material valve 0001-9800-0000 for sealing night caps and material connections

Flow direction from 8S to 1/4" Wrench size of the union nut 19(Wrench size of the valve 19)

Technical information:Suitable for pneumatic pistol grip - 0001-9500-0000P

Nozzle to check the mixing ratio (white version made of PTFE). For material joints version: 0001-9400-0202 0001-9400-0202VA

Nozzle to check the mixing ratio (white version made of PTFE) incl. cap nut. For material joints version: 0001-9400-0200 0001-9400-0200VA 0001-9400-0201 0001-9400-0201VA

The Teflon-coated adapter enables the installation of all nozzles with a M15x1.5 thread and thus a wide range of possible uses. IMPORTANT: The scope of delivery only includes the adapter without protective tube or nozzle! Technical characteristics: Teflon coating for easy and fast cleaning Internal thread on the inlet side for easy mounting on the t-s-i.de protective pipes with external thread (e.g. 0001-9998-0200) Including O-Ring to properly seal on the static mixer M15x1.5 thread on the outlet side for mounting numerous nozzles

With this nut you can fix the one way mixers with outside diameter 12.95 mm to the material joints. After you finished working, just remove the mixer, clean the surface of the outlet and cover the sealing joint with a night cap. For mixer product code 0001-9998-08... until 0001-9998-09... For mixer with outside diameter 12.95 mm Opening 13.3 mm Nut made of aluminium

The Teflon-coated adapter enables the installation of all metal nozzles with an external (male) 1/4" NPT thread and thus a wide range of possible uses. IMPORTANT: The scope of delivery only includes the adapter without protective tube or nozzle! Technical characteristics: Teflon coating for easy and fast cleaning Internal thread on the inlet side for easy mounting on the t-s-i.de protective pipes with external thread (e.g. 0001-9998-0200) Including O-Ring to properly seal on the static mixer Internal (female) 1/4" NPT thread on the outlet side for mounting numerous metal nozzles with external (male) thread (eg. 0001-9994-1/4-03X043)

Flow direction from 8L to 1/4" Wrench size of the union nut 17(Wrench size of the valve 19)

Partially pre-assembled conversion set with optimized handling for insulated glass production. Also available with different nozzles and adapters for lots of other industrial sectors. Consisting of: Electrical grip (straight version) with trigger Incl. protection pipe, adapter and nozzle For assembling on an existing valve 0001-9450-0000 with sealing material joint Mounting accessories Additional flexible handle at protection pipe For disposable mixers 0001-9998-1236

Screw connection with 8S outer thread and 1/4'' outer thread.

2 rotation axis Connections:M 14x1.5 (outside thread) / 16 S (inside thread) Dismountable For higher outflow rates

Technical information:Suitable for electric pistol grip - 0001-9500-0000E

The Teflon-coated adapter is designed for use with the rubber nozzle 0001-9998-0024 and is suitable in this constellation, for example for the production of insulating glass. IMPORTANT: The scope of delivery only includes the adapter without protective tube or nozzle! Technical characteristics: Teflon coating for easy and fast cleaning Internal thread on the inlet side for easy mounting on the t-s-i.de protective pipe with external thread (e.g. 0001-9998-0200) Including O-Ring to properly seal on the static mixer Smooth exit opening to quickly slide the rubber nozzle (0001-9998-0024)

Reducer fitting from outer thread 16R on to outer thread 8S.

The Teflon-coated adapter enables the installation of all nozzles with the typical cartridge coarse thread S15 and thus a wide range of possible uses. IMPORTANT: The scope of delivery only includes the adapter without protective tube or nozzle! Technical characteristics: Teflon coating for easy and fast cleaning Internal thread on the inlet side for easy mounting on the t-s-i.de protective pipes with external thread (e.g. 0001-9998-0200) Including O-Ring to properly seal on the static mixer Typical S15 cartridge coarse thread on the outlet side for mounting numerous nozzles

swivel connection with 08S on both sides (incl. nut)

Nozzle to check the mixing ratio (black) in a set with cap nut. White version made of PTFE, black version made of steel and PTFE coated. For material joints version: 0001-9400-0206 0001-9400-0206VA

2 rotation axis Connections:M 14x1.5 (outside thread) / 25 S (inside thread) Dismountable For higher outflow rates

Screw connection with 8S inner thread on both sides.

suitable for lubricating cartridges 400g  (0001-9998-0031) for lubricating material valve 0001-9800-0000 for sealing night caps and material joints including galvanized steel nozzle pipe including hydraulic mouthpiece