Global shipping
B2B Online Shop
Over 3,500 articles in stock

Lubricating grease circa 400g

€30.03*

Available stock: 65
Product number: 0001-9998-0031
Weight: 0.4 kg
Pictures may differ from original product
Product information "Lubricating grease circa 400g"
  • suitable for grease gun 0001-9998-0031GUN
  • for lubricating - material valve 0001-9800-0000
  • for sealing night caps and material connections

Data_sheet_2c_applicator_pistol_system_configuration.pdf

Properties "Lubricating grease circa 400g"
Delivery Time: incoming status / on request
Spare Part Filter: Dosing and Mixing

Similar

7 piece(s) in stock
Grease gun 400g without cartridge
Grease gun 400g without cartridge
suitable for lubricating cartridges 400g  (0001-9998-0031) for lubricating material valve 0001-9800-0000 for sealing night caps and material joints including galvanized steel nozzle pipe including hydraulic mouthpiece
Product number: 0001-9998-0031GUN

€66.37*
2C material valve with 1 cylinder
2C material valve with 1 cylinder
Versions: Standard
Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Max. material pressure 360 bar (dependent upon system) Connections: 2 x pneumatic hose D=4 mm (outside) / M5 Thread 2 x material connection with optional available elbow adaptersM14 x 1.5 Mounting thread for handle M4
Product number: 0001-9450-0000

€1,164.00*
2C material valve with 2 cylinders
2C material valve with 2 cylinders
Versions: Standard
Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Max. material pressure 360 bar (dependent upon system) Connections: 4 x pneumatic hose D=4 mm (outside) / M5 Thread 2 x material connection with optional available elbow adaptersM14 x 1.5 Mounting thread for handle M4
Product number: 0001-9800-0000

€2,470.00*
Contact