Global shipping
B2B Online Shop
Over 3,500 articles in stock

Cap nut for one way mixer and night caps

€32.50*

Available stock: 96
Versions
Product number: 0001-9998-0010BX
Weight: 0.025 kg
Pictures may differ from original product
Product information "Cap nut for one way mixer and night caps"

With this nut you can fix the one way mixers to the material joints. After you finished working, just remove the mixer, clean the surface of the outlet and cover the sealing joint with a night cap.

  • For mixer product code 0001-9998-04... until 0001-9998-06...
  • For mixer with outside diameter 7.62 mm to 9.40 mm
  • Nut made of aluminium
  • Fit also to our night caps

Data_sheet_2c_applicator_pistol_system_configuration.pdf

Data_sheet_one_way_mixer-disposable_mixers.pdf

Properties "Cap nut for one way mixer and night caps"
Delivery Time: incoming status / on request
Material: aluminum
Spare Part Filter: Dosing and Mixing

Similar

8 piece(s) in stock
Sealing material joint SI
Sealing material joint SI
The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) with centre-fed for B-component; recommended for silicone 2 x O-ring 4 x screw for mounting at the material valve
Product number: 0001-9400-0203X

€156.00*
2C material valve with 1 cylinder
2C material valve with 1 cylinder
Versions: Standard
Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Max. material pressure 360 bar (dependent upon system) Connections: 2 x pneumatic hose D=4 mm (outside) / M5 Thread 2 x material connection with optional available elbow adaptersM14 x 1.5 Mounting thread for handle M4
Product number: 0001-9450-0000

€1,164.00*
2C material valve with 2 cylinders
2C material valve with 2 cylinders
Versions: Standard
Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Max. material pressure 360 bar (dependent upon system) Connections: 4 x pneumatic hose D=4 mm (outside) / M5 Thread 2 x material connection with optional available elbow adaptersM14 x 1.5 Mounting thread for handle M4
Product number: 0001-9800-0000

€2,470.00*