The pneumatically operated dosing gun DP2X 400-01-50-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 400 Plunger discs: A=Ø35 mm, B=Ø27 mm Application type: Bead application Compressive force: 5.0 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 2,660 g (only the dispenser, without packaging, accessories etc.) Incl. valve socket EU (0001-5006-0014) This dispenser is approved for the following Sika adhesives: SikaForce®-803 L45 SikaForce®-820 L06 SikaForce®-825 L04 SikaForce®-840 L07 SikaForce®-840 L15 SikaForce®-800 Blue SikaForce®-800 Red SikaForce®-818 L07 We also offer the suitable mixers from the MIXPAC F system for processing these adhesives: MFQ 08-32D MFQ 08-24T MFH 10-24T MFH 08-24T MFQ 10-24T Suitable cartridges: MIXPAC 400 (mixing ratio 1:1, 395ml)  MIXPAC 400 (mixing ratio 2:1, 400ml) Dimensions of the cartridges: approx. length: 18.4 cm (without tip), 22.7 cm (with tip) approx. width: 93 cm Piston diameter of the cartridges:  A=Ø45 mm, B=Ø45 mm  (mixing ratio 1:1, 395ml)  A=Ø52.5 mm, B=Ø37 mm (mixing ratio 2:1, 400ml)

The pneumatically operated dosing gun DP2X 400-10-50-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 400 Plunger discs: A=Ø44 mm, B=Ø14 mm Application type: Bead application Compressive force: 5.0 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 3,660 g Incl. valve socket EU (0001-5006-0014) This dispenser is approved for the following Sika adhesives: SikaFast®-555 L03 SikaFast®-555 L05 SikaFast®-555 L10 SikaFast®-555 L25 SikaFast®-3131 SikaForce®-420 L45 SikaForce®-710 L30 SikaPower®-880 SikaPower®-1200 SikaPower®-1277 Sikaflex®-950 Sikaflex®-953 L15 Sikaflex®-953 L30 We also offer the suitable mixers from the MIXPAC F system for processing these adhesives: MFHX 10-24T MFQX 07-24T MFHX 10-18T MFHX 08-24T MFHX 10-32T MFQ 08-24T MFQ 08-32D MFQ 10-24T MFH 10-24T MFHX 13-18T Suitable cartridge: MIXPAC 400 (mixing ratio 10:1, 490ml) Dimensions of the cartridge: approx. length: 18.4 cm (without tip), 22.7 cm (with tip) approx. width: 92 cm Piston diameter of the cartridge: A=Ø67.5 mm, B=Ø22 mm

The pneumatically operated dosing gun DP2X 200-01-25-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 200 Plunger discs: A=Ø27 mm, B=Ø21 mm Application type: Bead application Compressive force: 2.5 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 1,760 g Incl. valve socket EU (0001-5006-0014) Suitable cartridges: MIXPAC 200 (1:1, 210ml) MIXPAC 200 (2:1, 215ml) Dimensions of the cartridges: approx. length: 14.8 cm (without tip), 19.0 cm (with tip) approx. width: 78 cm (mixing ratio 1:1, 210ml), 80 cm (mixing ratio 2:1, 215ml) Piston diameter of the cartridges:  A=Ø37 mm, B=Ø37 mm (mixing ratio 1:1, 210ml)  A=Ø43.5 mm, B=Ø31 mm (mixing ratio 2:1, 215ml)

The pneumatically operated dosing gun DP2X 200-10-25-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 200 Plunger discs: A=Ø44 mm, B=Ø11 mm Application type: Bead application Compressive force: 2.5 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 1,760 g (only the dispenser, without packaging, accessories etc.) Incl. valve socket EU (0001-5006-0014) This dispenser is approved for the following Sika adhesives: SikaFast®-555 L03 SikaFast®-555 L05 SikaFast®-555 L10 SikaFast®-555 L25 We also offer the suitable mixers from the MIXPAC F system for processing these adhesives: MFQX 07-24T MFHX 10-24T MFHX 06-24T MFHX 08-24T MFQX 08-24T MFQX 10-24T Suitable cartridge: MIXPAC 200 (10:1, 250ml) Dimensions of the cartridge: approx. length: 14.8 cm (without tip), 19.0 cm (with tip) approx. width: 75 cm Piston diameter of the cartridge: A=Ø55 mm, B=Ø19 mm

The pneumatically operated dosing gun CBA 25 1:1 is a dosing device for 2-component material, with which cartridges can be processed. 2C cartridge press Manufacturer: COX™ Drive: Pneumatic Application type: Bead application Container types: Side by side - industrial cartridge Capacity: 50 ml Compressive force: 0.9 kN Working pressure: 6.80 bar Mixture ratios: 1:1 Weight: 755 g Incl. valve socket EU (0001-5006-0014)

The pneumatically operated dosing gun VBA (MR) 400 A Alu Frame is a dosing device for 2-component material, with which cartridges can be processed. Including plungers for mixing ratios 1:1 to 10:1. 2C cartridge press Manufacturer: COX™ Drive: Pneumatic Application type: Bead application Container types: Side by side - cartridge Capacity: 400 ml, 405 ml, 425 ml, 495 ml Compressive force: 5.25 kN Working pressure: 6.80 bar Mixture ratios: 1:1, 2:1, 4:1, 10:1 Weight: 4,110 g Incl. valve socket EU (0001-5006-0014)   Recommended Kömmerling adhesives and sealants: Körapop 225 Körapop 240 Ködiglaze S Ködiglaze SDG

The pneumatically operated dosing gun DP2X 400-04-50-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 400 Plunger discs: A=Ø44 mm, B=Ø21 mm Application type: Bead application Compressive force: 5.0 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 2,660 g (only the dispenser, without packaging, accessories etc.) Incl. valve socket EU (0001-5006-0014) Suitable cartridges: MIXPAC 400 (mixing ratio 4:1, 415ml) Dimensions of the cartridges: approx. length: 18,4 cm (without tip), 22.7 cm (with tip) approx. width: 91 cm Piston diameter of the cartridges: A=Ø58 cm, B=Ø30 cm

The pneumatically operated dosing gun MK™ TS447 is a dosing device for 2-component material, with which cartridges can be processed. 2C cartridge press Manufacturer: MK Drive: Pneumatic Application type: Bead application Container types: DOW cartridges that are connected with a T-piece Capacity: 2 x 310ml Compressive force: 6.25 kN Working pressure: 8.00 bar Mixture ratios: 1:1 Viscosity: high Weight: 2.580 g Incl. valve socket EU (0001-5006-0014)

The pneumatically operated dosing gun MK™ TS488X is a dosing device for 2-component material, with which cartridges can be processed. 2C cartridge press Manufacturer: Sulzer Mixpac Drive: Pneumatic Application type: Bead application Container types: Side by side - cartridge Capacity: 620 ml Compressive force: 4.00 kN Working pressure: 8.00 bar Mixture ratios: 1:1 Weight: 2.520 g Incl. valve socket EU (0001-5006-0014)

The pneumatically operated dosing gun VBA (MR) 400 A Alu Frame is a dosing device for 2-component material, with which cartridges can be processed. Including plunger for mixing ratio 10:1. 2C cartridge press Manufacturer: COX™ Drive: Pneumatic Application type: Bead application Container types: Side by side - cartridge Capacity: 400 ml, 405 ml, 425 ml, 495 ml With a pressure of 660 kg Powerful pressure regulator 8.6 bar Mixing ratio: 10:1 With reinforced front panel Weight: 3500 g Incl. valve socket EU (0001-5006-0014)   Recommended Kömmerling adhesives and sealants: Körapop 225 Körapop 240 Ködiglaze S Ködiglaze SDG

The pneumatically operated dosing gun DP2X 200-04-25-01 is a dosing device for 2-component material, with which side-by-side cartridges can be processed. Specifications: 2C Cartridge Press Capacity class: 200 Plunger discs: A=Ø35 mm, B=Ø14 mm Application type: Bead application Compressive force: 2.5 kN Working pressure: 6.80 bar Air inlet: 1/4 in NPT Weight: 1,760 g (only the dispenser, without packaging, accessories etc.) Incl. valve socket EU (0001-5006-0014) Suitable cartridges: MIXPAC 200 (4:1, 225ml) Dimensions of the cartridges: approx. length: 14.8 cm (without tip), 19.0 cm (with tip) approx. width: 76 cm Piston diameter of the cartridges: A=Ø49 mm, B=Ø25 mm

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. Technical information: Pneumatic bi-mixer for Plaspak and Ritter clip together cartridges (214-217mm length) Mixing ratio 4:1 (300+75ml) Power 2.2 kN For processing of for example Körapur 840/45

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. Technical information: 2-component pneumatic bi-mixer Compressive power 2.2kN; 6,8 bar All mixing ratios For all types of Mixpac 200ml series cartridges Especially for processing of Körapop 225 2-K from 10:1 double-cartridges (220 ml) or Ködiglaze SAlternative: 0001-5064-0000EU connector for air connection: 0001-5006-0014

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. Technical information: 2-component pneumatic bi-mixer for 400 ml cartridge systems Mixing ratio 1:1 (2 x 200 ml) Piston for cartridge diameter 44,8 mm Cartridge-high (without nozzle) 185mm Cartridge-width (A+B): 91,5 mm Power 5.25 kN For high viscosity (paste-like) 2c materials

The pneumatically operated dosing gun MK™ TS493X is a dosing device for 2-component material, with which cartridges can be processed. 2C cartridge press Manufacturer: MK Drive: Pneumatic Application type: Bead application Container types: Clip-Together cartridges Capacity: 600 Compressive force: 4.00 kN Working pressure: 8.00 bar Mixture ratios: 1:1 Weight: 2.580 g (only the dispenser, without packaging, accessories etc.) Incl. valve socket EU (0001-5006-0014)