This model is an electrically heated and pneumatically operated flow gun for processing aluminum cartridges (approx. 300 ml). It can also be worked vertically upwards (overhead). Some customers also use reusable steel cartridges with pistons (here the customer fills his material directly into the cartridge). The temperature is set via a bimetallic thermostat. The temperature range is between 30-200 degrees C °. There is an opening at the bottom edge of the gun with a slotted sleeve. Turning it clockwise with a screwdriver increases the temperature in the cylinder. This can be read on a thermometer on the back of the gun. The gun includes a tray with a pressure reducing valve and a pressure gauge for setting and reading the discharge pressure. An extensive range of nozzles is available. A thermal fuse prevents overheating of the adhesive. For working without interruptions, the use of a cartridge preheater is recommended. Technical information: Heating range: 30 ° - 200 ° C Heating time: approx. 20 - 50 min Air consumption: approx. 30 l / min at 4 bar Weight: about 1900g Connected load: 230/115 V, 50-60 Hz Heating power: 400 watts Flow rate: 60 g / min max. Working pressure: 1 - 6 bar

The high-quality ElectraFlow™ Plus Combi 600 dosing gun is operated with the new 18V Bosch battery technology and therefore fits perfectly into the existing power tool system of most companies. Both cartridges and foil bags can be used in this dosing device for 1-component material. 1C cartridge press Manufacturer: COX™ Drive: Battery Application type: Bead application Container types: Foil bag, cartridge Capacity: 310 ml, 400 ml, 500 ml, 600 ml Compressive force: 3.5 kN Voltage: 18 V Weight: 2,500 g In connection with this product, please note our battery and disposal information.

The high-quality ElectraFlow™ Plus Cartridge 310 EU dosing gun is operated with the new 18V Bosch battery technology and therefore fits perfectly into the existing power tool system of most companies. In this dosing device for 1-component material you can use cartridges with a capacity of 310 ml. 1C cartridge press Manufacturer: COX™ Drive: Battery Application type: Bead application Container types: Cartridge Capacity: 310 ml Compressive force: 3.5 kN Voltage: 18 V Weight: 2,380 g In connection with this product, please note our battery and disposal information.

Technical information: Switchable from pressure to vacuum Vacuum valve on handhold Intake pressure: 6-7bar / grouted pressure 3-6 bar Incl. 3 pcs plastic nozzles ""P""- M 22x1mm (outside) Cylinder volume circ. 600ml d=2"" (50,8mm) Aluminium nozzle-cap, cylinder anodized The material willl be sucked into the gun-cylinder

Technical information: Ergonomic design with 10:1 mechanical leverage Dispenses also thick greases and silicones For syringe 30cc barrels, pistons and tips Easy maintenance Reusable Product of Nordson EFD

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. The pneumatically operated dosing gun AirFlow™ 2 Combi 310 HP is a dosing device for 1-component material, with which both cartridges and foil bags can be processed. 1C cartridge press Manufacturer: COX™ Drive: Pneumatic Application type: Bead application Container types: Foil bag, cartridge Capacity: 290 ml, 310 ml Compressive force: 2.2 kN Working pressure: 6.80 bar Weight: 1,300 g

Technical information: Gun body made of pressed aluminium With finger protector + notch for lodging Powder-coated surface Cartridge fixture: round thread, aluminium pipe sleeve Capacity / content: 300 - 320 ml Valve: brass / stainless steel Sealings oil- and gasoline-resistant Injector brass with nozzle cap Extrusion nozzle: 6,5 mm nozzle cap with plastic nozzle set to be screwed onto spray nozzle Operating pressure 2-6 bar Mode: overpressure Compressed air connection 1/4” female thread or plug nipple The seam sealing gun is used for processing sprayable seam sealant from 300 ml to 320 ml plastic cartridges. The adjustable nozzle cap provides a material air flow control and adjustable spray regulation, so that various structures could be sprayed. When using the nozzle cap 6.5mm and the plastic nozzle set (included), the material may be applied in beads with different cross sections.

Air gun for 310ml cartridge, for cartridge length up to 215mm, Ø 50 mm. With high-performance grip for challenging applications. The direct-mechanism pushing the air straight to the piston. Lightweight and compact. Technical information: Power 1.35kN with 6,8 bar air pressure Aluminium pipe: length 236.5 mm Infinitely variable working pressure

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. Technical information: For 600 ml pouches; max. 335x50mm Floating plunger with tethered piston Power 1.45kN with 6.8 bar air pressure Tube length 445 mm

Technical information: For 400 ml sachets Floating plunger with tethered piston Power 1.45kN with 6,8 bar air pressure Tube length 337 mm

Important: For use with the typical compressed air connections in Europe, a special valve socket (0001-5006-0014) is required, which must be ordered separately, if needed. Technical information: For 600 ml pouches; max. 335x50mm Floating plunger with tethered piston Power 1.45kN with 6.8 bar air pressure Tube length 445 mm

Technical information: Power 2.5 kN (~ 250 kg), stroke 5.7 mm For 1 component cartridge with 310 ml Dimensions Ø 50 x 215 mm For high viscosity (paste-like) materials High transmission ratio Rotary frame AntiDrip function

The manually operated dosing gun H40+ is the topseller in the field of dosing devices for 1-component material. It can process cartridges. 1C cartridge press Manufacturer: MK™ Drive: Manual Application type: Bead application Container types: Cartridge Capacity: 290 ml, 310 ml Advantage: 18:1 Weight: 950 g

The manually operated dosing gun H245M is a dosing device for 1-component material, with which cartridges can be processed. It is also known as DM1K 310-CA-R26-001 and 151727. 1C cartridge press Manufacturer: MK™ Drive: Manual Application type: Bead application Container types: Cartridge Capacity: 290 ml, 310 ml Advantage: 25:1 Weight: 800 g

Technical information: Multifunctional aluminium gun for cartridges and pouches up to 600 ml Pressure ratio 18:1 Cartridges 310ml / 400ml up to 600ml Tube length 375 mm

Technical information: Manual-cartridge mastic gun For cartridge 310ml/ 400ml Tube length 220mm, diameter 50 mm Pressure power gear ratio 25:1 For high viscosity (paste-like) materials

The manually operated dosing gun H2PS is a dosing device for 1-component material, with which both cartridges and foil bags can be processed. 1C cartridge press Manufacturer: MK™ Drive: Manual Application type: Bead application Container types: Foil bag, cartridge Capacity: 290 ml, 310 ml, 400 ml, 500 ml, 600 ml Advantage: 18:1 Weight: 1300 g

Technical information: Multifunctional aluminium gun for cartridges and sachets up to 400 ml Pressure ratio 12:1 Cartridges 310ml / 400ml 310ml / 400ml Tube length 267 mm

The manually operated dosing gun Gigapress Cartridge 310 is a dosing device for 1-component material, which is standing out due to its high advantage of 35:1. It can process cartridges. 1C cartridge press Manufacturer: Brilliant Drive: Manual Application type: Bead application Container types: Cartridge Capacity: 290 ml, 310 ml Advantage: 35:1

The manually operated dosing gun PowerFlow™ Cartridge 310 HP is a dosing device for 1-component material, with which cartridges with a capacity of 290 ml and 310 ml can be processed. 1C cartridge press Manufacturer: COX™ Drive: Manual Application type: Bead application Container types: Foil bag, cartridge Capacity: 310 ml, 400 ml, 500 ml, 600 ml Advantage: 18:1 Weight: 750 g

The manually operated dosing gun CG-HP20 18 is a dosing device for 1-component material, with which cartridges can be processed. 1C cartridge press Manufacturer: Altachem Drive: Manual Application type: Bead application Container types: Cartridge Capacity: 290 ml, 310 ml Advantage: 18:1