Content: Desiccant reservoir comfort with connection G 3/4" Desiccant reservoir will be delivered completely filled with SILICA GEL (around 0.5 kg). Color indicator ORANGE -> GREEN (color may differ depending on refill products)

Content: Desiccant reservoir comfort aluminium version with connection G 3/4" Desiccant reservoir will be delivered completely filled with SILICA GEL (around 0.6 kg). Color indicator ORANGE -> GREEN (color may differ depending on refill products)

Content: gravity tank 2l 3/8" (outside) height 28cm / diam. 12.6cm

Technical information: Adapter for sealing gun 0001-9990-0000 to external thread M15x1.5 Suitable for cartridge tip e.g. 0001-4900-2000

Sheet steel fixed castor with top plate wheel with standard solid rubber tires, with sheet steel rim. Housing: pressed sheet steel, wheel axle screwed, zinc-chromated Wheels: pressed steel rims, zinc chromated. Standard tires Solid rubber, 80° Shore A. Load capacity: 100 kg Wheel Diameter: 125mm Total height: 150mm Bearing type: roller bearing

Rotating Cavity Pump/ Progessive Cavitiy Pump, valve-free, self-priming, almost pulsation free Suitable for low and highly viscous products with/ without solid-content Suitable for shear-sensitive, abrasive, non-smearing substances, thixotropic and dilatant Inlet pressure standard: max. 10 bar; differential pressure up to 48 bar, standard; higher pressure possible Delivery volume from less ml/h up to 400 m3/h Shaft sealing depending on product, stuffing-box, single-/ double mechanical seals, magnetic-coupling

Following plate 20 l drum (20 l Hobbock)

Content: gravity tank 0.6l M16x1.5 (in.) height 15.7cm / diam. 15.7cm

Ring for following plate 20 l (20 l Hobbock) 8 x M6 threads

Content: gravity tank 6l M36x2 (in.) height 35cm / diam. 24.3cm

Grooved nut for fastening the piston pumps

This dynamic mixing head was designed for the processing of liquid materials with low and medium viscosity. The special design and dynamic mixing create and ensure the optimal homogenization of the components especially of the sensitive materials and difficult mixing ratios. The mixing head is completely manufactured in stainless steel and, if required, even equipped with the FDA – compliant seals. Technical Information: Dimensions (w x l x h) 240 x 350 x 370 mm Material stainless steel Wight (including motor) appr. 12 kg Working range / Flow rate up to 2500 ccm / min* *depending on viscosity, temperature, batch of material etc. Properties: Dynamic mixing of the material High flow rate up to 2500 ccm / min Frequency controlled drive for accurate speed control Flushable mixing unit Pneumatically operated lock valves Position detection for lock valve Advantages: Optimal mixing results Minimum loss of material due to optimized design Easy handling due to bayonet connecting system Low level operation and maintenance costs

Technical information: Adapter for sealing gun 0001-9999-0022 Suitable for cartridge tip e.g. 0001-4900-0310D

Easy drum change with 200 liter following plate (with reactive materials)

Extension adapter for screw plug 2000-0300-0014B Width across flats 27  

This dynamic mixing head was designed for the processing of liquid materials with low and medium viscosity. The special design and dynamic mixing create and ensure the optimal homogenization of the components especially of the sensitive materials and difficult mixing ratios. The mixing head is completely manufactured in stainless steel and, if required, even equipped with the FDA – compliant seals. Technical Information: Dimensions (w x l x h) 290 x 440 x 500 mm Material stainless steel Wight (including motor) appr. 20 kg Working range / Flow rate up to 5000 ccm / min* *depending on viscosity, temperature, batch of material etc. Properties: Dynamic mixing of the material High flow rate up to 5000 ccm / min Servo drive for accurate speed control Flushable mixing unit Pneumatically operated lock valves Position detection for lock valve Advantages: Optimal mixing results Minimum loss of material due to optimized design Easy handling due to bayonet connecting system Low level operation and maintenance costs

Technical information: Adapter for sealing gun 0001-9999-0022 to external thread M15x1.5 Suitable for cartridge tip e.g. 0001-4900-2000

Technical information: Adapter for sealing gun 0001-9999-0022 with mounted adapter 2000-0300-0131B Suitable for connection to purging pump 2000-0202-0000

This dynamic mixing head was designed for the processing of liquid materials with low and medium viscosity. The special design and dynamic mixing create and ensure the optimal homogenization of the components especially of the sensitive materials and difficult mixing ratios. The mixing head is completely manufactured in stainless steel and, if required, even equipped with the FDA – compliant seals. Technical Information: Dimensions (w x l x h) 200 x 280 x 300 mm Material stainless steel Wight (including motor) appr. 5.5 kg Working range / Flow rate up to 1000 ccm / min* *depending on viscosity, temperature, batch of material etc. Properties: Dynamic mixing of the material Flow rate up to 1000 ccm / min Frequency controlled drive for accurate speed control Flushable mixing unit Pneumatically operated lock valves Position detection for lock valve Advantages: Optimal mixing results Minimum loss of material due to optimized design Easy handling due to bayonet connecting system Low level operation and maintenance costs

The slump tester can be used to measure and compare the viscosity of high-viscosity adhesives and sealants.For this purpose, the examined material must be poured into the hole with the plunger retracted and the top edge smoothed out. The plunger is then fully extended and, after a predetermined period of time, the scale reads how far the material has flowed.

Pressed steel swivel castor with top plate. Wheel with standard solid rubber tires, with sheet steel rim. Housing: Pressed sheet steel, with 2x ball bearing in the slewing ring, therefore extremely low slewing ring play and long service life, with turntable seal, wheel axle screwed, zinc-chromated. Wheels: pressed steel rims, zinc-chromated. Standard tires Solid rubber, 80° Shore A. Load capacity: 100 kg Wheel Diameter: 125mm

In the case of low-viscosity B components with an inliner, which are processed with a following plate, the use of the perforated plate is absolutely necessary.This is the only way to avoid, that the inliner get sucked into the machine, which could cause damage to the following components.

Support ring for following plate 20 l (20 l Hobbock) 8 x hole diameter 7

suitable for lubricating cartridges 400g  (0001-9998-0031) for lubricating material valve 0001-9800-0000 for sealing night caps and material joints including galvanized steel nozzle pipe including hydraulic mouthpiece