Piston pump for high viscosity (paste-like) materials Temperature range up to 200 C° Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for B-component Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Piston pump for low viscosity (liquid) materials Suitable also for isocyanate Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped,different sealings could be required

Piston pump for high viscosity (paste-like) materials / for A-component Volumetric displacement 98 ccm by double stroke Max. material pressure 360 bar (dependent upon system) Stroke 100mm Depending on the medium which has to be pumped, different sealings could be required

Displacement pump / reciprocating pump Used for high viscosity (paste-like) materials and also for low viscosity (liquid) materials Suitable also for isocyanate Mixing ratio adjustable depending on rocker setup from 13:1 to 7:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Displacement pump / reciprocating pump For high viscosity (paste-like) materials Mixing ratio adjustable depending on rocker setup from 13:1 to 7:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Technical information: pneumatically adjustable stainless steel

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Displacement pump / reciprocating pump Used for high viscosity (paste-like) materials and also for low viscosity (liquid) materials Suitable also for isocyanate Mixing ratio adjustable depending on rocker setup from 7:1 to 3.5:1 Max. material pressure dependent upon system Depending on the medium which has to be pumped, different sealings could be required

Set complete pre-assembled consisting of: compactmix 13 mm (2001-1015-0000) with 3 stainless-steel mixing sections for polyurethane, silicone and polysulfide materials Demountable for cleaning Sealing gun (0001-9990-0000) Z-swivel joint (0001-9981-0000A) Material joint and fittings

Hydraulic cylinder for t-s-i.de mixing and dosing systems

One-component dosing valve

Set complete pre-assembled consisting of: Trumpet mixer 15L (0001-9999-0013) with 3 stainless-steel mixing sections for polyurethane, silicone and polysulfide materials Sealing gun (0001-9990-0000) Z-swivel joint (0001-9981-0000A) Material joint and fittings

Dismountable for easy cleaning process With additional PTFE surface coating very easy to clean by compact and ergonomic design 3 stainless-steel mixing sections(Elements: diameter 13mm / exchangeable) Connection G 3/8" internal thread for polyurethane, silicone and polysulfide materials Length 360 mm, Diameter 43 mm Weight: 1.5 kg

280 bar maximum working pressure Connection 1/4" NPT Additional connections available to use cartridge nozzles or rubber nozzles.

Technical Information: Pressure transmitter with output signal E = 4..20 mA Autozero function with magnetic pen - Reset the sensor to 0, after installation with the solenoid! Material: stainless steel The appropriate M12 connector must be ordered separately - item number 0004-0001-1828

Technical Information: 3 switches Diameter body-housing 100 mm 0-400 bar Connection G 1/2 at the bottom

Following plate 20 l drum (20 l Hobbock)

Admissible operating pressure 350 bar Adjustable flow volume Connection  G1/4"  NPT internal thread Incl. adapter to G1/4"  internal thread

Seal kit for piston pump version 2000-0220-0000THE

Technical data: pneumatically adjustable stainless steel

Pressure control valve / Material flow limiting valve Technical Information: Variable control of flow volume Connections 1/4" (inside thread)

Seal kit for piston pump version 2000-0220-0000SI

Seal kit for dosing pump 5:1 version 2000-0218-0000T