Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

One-component dosing valve

Manufacturer Festo CPE24-M1H-3GL-QS-12 series Valve function 3/2-way, closed, monostable Type of actuation Electric Construction width 24 mm Standard nominal flow rate 1.650 l/min pneumatic working port QS-12 Operating voltage 24V DC Operating pressure 0,25 MPa ... 1 MPa Operating pressure 2,5 bar ... 10 bar Design Piston gate valve Type of reset pneumatic spring Degree of protection IP65 With plug socket To IEC 60529 Nominal size 11 mm Sealing principle soft Mounting position optional Manual override Detenting via accessory Non-detenting Type of piloting pilot actuated Pilot air supply internal Flow direction non-reversible Article image: ©Festo SE & Co. KG, all rights reserved

Manufacturer Festo JH-5-1/4 series Robust and proven Seat valve All-metal design

3/8” inner thread

Manufacturer Festo SVS-3-1/8 series Valve function: 3/2-way, closed, monostable Type of actuation: mechanical Pneumatic working port: G1/8 Operating pressure: 3.5 bar ... 8 bar Pneumatic connection, port 1: G1/8 Pneumatic connection, port 2: G1/8 Pneumatic connection, port 3: G1/8

Manufacturer Festo VHER-P-H-B43C-B-G18 series Valve function: 4/3 closed Type of actuation: Manual Construction width: 42 mm Pneumatic working port: G1/8 Operating pressure: 0 bar ... 10 bar Note on operating pressure: Vacuum operation at connection 3 only In the case of dual-pressure operation, the pressure at port 1 must be higher than at port 3. Pneumatic connection, port 1: G1/8 Pneumatic connection, port 2: G1/8 Pneumatic connection, port 3: G1/8 Pneumatic connection, port 4: G1/8

Pneumatic position detector, IP65 Manufacturer Festo SMPO-8E series Usable with T-Slot Type proximity sensor IP protection class IP65 Operating pressure at least 2 bar Operating temperature min. -15°C Operating temperature max. +60°C Operating pressure max. 8 bar Outlet connection - pipe size M5 Output connector M5

Manufacturer Joyner BR 311202 M5 series Mechanically operated 3/2 way Piston slide valve with mechanical spring return. The roller lever valve type BR can be operated from two sides.

socket line Manufacturer Festo KMEB-1-24-5-LED series Signal status display: LED yellow Installation position: any Electrical connection 1: socket according to EN 175301-803, form C Electrical connection 1: Square design Electrical connection 1: socket connection type Electrical connection 1: Angled cable outlet Electrical connection 1: Angled cable outlet Electrical connection 1: number of poles/wires 3 Electrical connection 1: Type of attachment on solenoid valve with M2.5 central screw Electrical connection 2: connection technology open end Electrical connection 2: number of poles/wires 3 Rated Working Voltage: DC 24V Cable Length: 5m Housing material: PA66-GF30 Material seals: NBR Material of plug contacts: Copper alloy, silver-plated

Manufacturer Festo GR-QS-6 series Valve function One-way flow control function Pneumatic connection, port 1 QS-6 Pneumatic connection, port 2 QS-6 Adjustment component Knurled screw Type of mounting Front panel mounting With through-hole with accessories Either Standard nominal flow rate in flow control direction 245 l/min Standard nominal flow rate in blocked direction 430 l/min Operating pressure 0,2 bar ... 10 bar Ambient temperature -10 °C ... 60 °C Article image: ©Festo SE & Co. KG, all rights reserved

Manufacturer Festo VUWS-L20-M32U-M-G18 series Valve function: 3/2 open, single solenoid Type of actuation: Pneumatic Valve size: 21 mm pneumatic working port: G1/8 Design: Piston gate valve Type of reset: Mechanical spring Pneumatic connection, port 1: G1/8 Pneumatic connection, port 2: G1/8 Pneumatic connection, port 3: G1/8 Article image: © Festo SE & Co. KG, all rights reserved

Manufacturer Festo OS-1/8-B series Valve function: OR function Pneumatic connection, port 1: G1/8 Pneumatic connection, port 2: G1/8 Pneumatic connection, port 3: G1/8 Nominal size: 4 mm

Sand blasted, nickel-plated brass Butterfly handle, G 1/4 IT Medium/ambient temp. -10°C to 90°C DN 8, PN max. 10 bar

Manufacturer Festo N-22-SW series Installation diameter 22,5 mm Degree of protection IP40 Actuating torque 0,4 Nm Product weight 21 g Colour Black Article image: ©Festo SE & Co. KG, all rights reserved

Manufacturer Festo T-22-SW series Installation diameter: 22.5 mm Degree of protection: IP40 Actuating force: 14 N Product weight: 14.0 g Color: black

Manufacturer Festo AHB-MEB series Mounting position: optional Corrosion resistance class CRC: 2 - Moderate corrosion stress Ambient temperature: -5 °C ... 60 °C Type of mounting: Snapping in Material housing: PA6 reinforced

G 1/4 made of plastic

G 3/8 made of plastic

G 1/8 made of plastic