Technical Information: measurement range: 0.3-70 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.125 ml/ pulse (interpolation factor 16)

Technical Information: measurement range: 0.03-20 l/min used depending on application/material/discharge capacity for A- and B-components resolution 0.025 ml/ pulse (interpolation factor 16)

Rotating Cavity Pump/ Progessive Cavitiy Pump, valve-free, self-priming, almost pulsation free Suitable for low and highly viscous products with/ without solid-content Suitable for shear-sensitive, abrasive, non-smearing substances, thixotropic and dilatant Inlet pressure standard: max. 10 bar; differential pressure up to 48 bar, standard; higher pressure possible Delivery volume from less ml/h up to 400 m3/h Shaft sealing depending on product, stuffing-box, single-/ double mechanical seals, magnetic-coupling

Optional for mastermix-LV-series Heating sleeve for pressure tank 0006-0060-1200 120.0 litre Content: For all pressure tanks we have different sizes of heating sleeves for temperature up to max. 100 °C - Attention: standard tanks max. heating up to 50 °C pressure tanks for 100 °C on request One-piece dagged PTFE glass fabric material - 25 mm thickness Hook-and-loop fastener Temperature sensor PT100 integrated Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Content*: Incl. temperature controller and Schuko plug Improved processing of pasty materials Operating temperature: 100 °C Inner diameter: 265/280 mm / length: 370 mm at version for 20 l Length x height 1840 mm x 880 mm at version 200 l With mounted electronic regulator / limiter Indicator lights for mains, operation and malfunction Power supply: 2.0m long with Schuko plug Rated capacity: 400W and Nominal voltage: 230 V AC at version 20 l Rated capacity: 950W and nominal voltage: 230 V AC at version 200 l Version: moisture-proof, earthed *Shown pictures may differ from original product

Optional for mastermix-LV-series Heating sleeve for pressure tank 0006-0060-0120 11.8 litre incl. heating controller and safety plug  Content: For all pressure tanks we have different sizes of heating sleeves for temperature up to max. 100 °C - Attention: standard tanks max. heating up to 50 °C pressure tanks for 100 °C on request One-piece dagged PTFE glass fabric material - 25 mm thickness Hook-and-loop fastener Temperature sensor PT100 integrated Temperature limiter PT100 integrated With built-in electronic controller / limiter - temperature range 0-200 ° C Switching capacity controller 2300 VA / 230V, protection class IP65 Indicator lights for network, operation and malfunction (sensor break / sensor short circuit) Offer after detailed technical specification of the project requirements. For further details please check our brochure "Optional for mastermix-LV-series"

Content*: Compact self-programmable temperature controller according to DIN/VDE 0721 Switching power 3680 W / control range 0-200 °C Comparison point compensation, sensor breakage protection, sensor polarity control, PT 100, 2 conductor DIN/IEC 230 Volt AC / 50 Hz, Option 115 Volt *Content and prices for backfitting will differ

Content*: Compact heating element made of sheet metal Improved processing of pasty materials Signal via PT 100 / 2-wire in the connection cap Consisting of 2 halves with 125 W each Suitable for all series of t-s-i.de piston pumps Inner diameter 89 mm / length 200 mm *Content and prices for backfitting will differ

Technical Information: Pressure transmitter with output signal E = 4..20 mA Autozero function with magnetic pen - Reset the sensor to 0, after installation with the solenoid! Material: stainless steel The appropriate M12 connector must be ordered separately - item number 0004-0001-1828

Manufacturer Festo SME-8M-DO-24V-K-75-OE series Electrical connection 1, connection type: Cable Electrical connection 1, connector system: Open end Electrical connection 1, number of connections/cores: 3 Connection outlet orientation: In-line Energy chain: 5 million cycles, bending radius 75 mm Cable length: 7.5 m Cable characteristic: Standard + energy chain Material cable sheath: TPE-U(PUR) Type of mounting: Screw-clamped / Insertable in the slot from above Article image: ©Festo SE & Co. KG, all rights reserved

socket line Manufacturer Festo KMEB-1-24-5-LED series Signal status display: LED yellow Installation position: any Electrical connection 1: socket according to EN 175301-803, form C Electrical connection 1: Square design Electrical connection 1: socket connection type Electrical connection 1: Angled cable outlet Electrical connection 1: Angled cable outlet Electrical connection 1: number of poles/wires 3 Electrical connection 1: Type of attachment on solenoid valve with M2.5 central screw Electrical connection 2: connection technology open end Electrical connection 2: number of poles/wires 3 Rated Working Voltage: DC 24V Cable Length: 5m Housing material: PA66-GF30 Material seals: NBR Material of plug contacts: Copper alloy, silver-plated

Reed contact

Magnetic field sensor

Technical data: Cable socket angled M12 For pressure transducer version 0004-0032-1005

Circular Plug Socket, Straight Series (Circular Connector) Fit to 0004-0014-1009

Circular Connector Plug, Straight Series (Circular Connector) Fit to 0004-0014-1010