Global shipping
B2B Online Shop
Over 3,500 articles in stock

2C material valve with 1 cylinder

€1,164.00*

Available stock: 12
Versions
Product number: 0001-9450-0000
Weight: 0.781 kg
Pictures may differ from original product
Product information "2C material valve with 1 cylinder"

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”.

  • Easy to clean / completely dismountable
  • Optional in stainless steel version, recommended for corrosive acrylics or epoxies
  • Specially coated pistons to resist abrasive adhesives
  • Optional different material connections, depending on mixing ratio and viscosity
  • Optional night cap’s and ratio check cap
  • Optional retaining nuts and protective pipes for a wide range of static mixers
  • Can be used as hand-held or stationary unit
  • Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve
  • Max. material pressure 360 bar (dependent upon system)

Connections:

  • 2 x pneumatic hose D=4 mm (outside) / M5 Thread
  • 2 x material connection with optional available elbow adapters
    M14 x 1.5
  • Mounting thread for handle M4

assembly_drawing.pdf

Data_sheet_2c_applicator_pistol_system_configuration.pdf

Operating and maintenance instructions.pdf

Properties "2C material valve with 1 cylinder"
Delivery Time: incoming status / on request
Spare Part Filter: Pneumatics, Dosing and Mixing

Similar

Sealing set for material valve
Sealing set for material valve
For 2-component valve 0001-9450-0000.
Product number: 0001-9450-0500

€149.65*
Lubricating grease circa 400g
Lubricating grease circa 400g
suitable for grease gun 0001-9998-0031GUN for lubricating - material valve 0001-9800-0000 for sealing night caps and material connections
Product number: 0001-9998-0031

€30.03*
2 piece(s) in stock
2C material valve with 1 cylinder - stainless steel version
2C material valve with 1 cylinder - stainless steel version
Versions: Stainless steel version
Stainless steel version of the pneumatic 2-component valve with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Stainless steel version, recommended for corrosive acrylics or epoxies Easy to clean / completely dismountable Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Max. material pressure 360 bar (dependent upon system) Connections: 2 x pneumatic hose D=4 mm (outside) / M5 Thread 2 x material connection with optional available elbow adaptersM14 x 1.5 Mounting thread for handle M4
Product number: 0001-9450-0000VA

Variants from €1,164.00*
€1,685.18*