Pneumatic 2-component valve (aluminium) with retractable pistons, which ensure precise control of spot and shot volume. After each shot, the pistons retract material from the end of the mixing nozzle, to minimise “after drool”. A- and B-component can be separately controlled for example to purge with A-component or to use variable shifting times. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Mechanical separation from material-chamber and pneumatic cylinder’s Both pistons lubricated twice with special grease for moisture sensitive adhesives A and B-component can be greased separately to avoid curing in the valve Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Completely pre-assembled 2c-valve-set with optimized handling for insulated glass production. Also available with different nozzles and adapters for lots of other industrial sectors. Consisting of: Material joint 0001-9400-0203 2-component valve 0001-9450-000 Incl. protection pipe, adapter and nozzle Electrical grip (straight version) with trigger Mounting accessories Additional flexible handle at protection pipe For disposable mixers 0001-9998-1236

Pneumatic 2-component valve (aluminium) with retractable piston, which ensures precise control of spot and shot volume. After each shot, the dual pistons retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Optional in stainless steel version, recommended for corrosive acrylics or epoxies Specially coated pistons to resist abrasive adhesives Optional different material connections, depending on mixing ratio and viscosity Optional night cap’s and ratio check cap Optional retaining nuts and protective pipes for a wide range of static mixers Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 2 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Pneumatic 1-component valve (aluminium) with retractable pistos, which ensure precise control of spot and shot volume. After each shot, the piston retract material from the end of the mixing nozzle, to minimise “after drool”. Easy to clean / completely dismountable Mechanical separation from material-chamber and pneumatic cylinder’s Specially coated piston to resist abrasive adhesives Material connection block is also dismountable for easy cleaning and exchangable Optional night cap available Usage of different nozzles is possible Can be used as hand-held or stationary unit Optional we offer electric or pneumatic handles for actuating the air cylinder at the valve Connections: 1 x M15x1,5 thread to connect customary nozzles to the material connector 4 x pneumatic hose D=4 mm (outside) 2 x material connection with optional available elbow adapters

Partially pre-assembled conversion set with optimized handling for insulated glass production. Also available with different nozzles and adapters for lots of other industrial sectors. Consisting of: Electrical grip (straight version) with trigger Incl. protection pipe, adapter and nozzle For assembling on an existing valve 0001-9450-0000 with sealing material joint Mounting accessories Additional flexible handle at protection pipe For disposable mixers 0001-9998-1236

For 2C material valve version 0001-9450-0000V and 0001-9450-0000.

Pistol grip for 2 component valve Grab handle / handhold with trigger Electrically controlled Make contact / key button for 24 V on the trigger 5 m connecting cable (2x0,5mm²) Low weight Ergonomically designed Dismountable

Pistol grip for 2 component valve Grab handle / handhold with trigger pneumatically controlled Incl. manually operated pneumatic valve 5/2 way valve (installed in the handle) Inlet pressure max. 0-10 bar Nominal flow 125 l/m Switching power 6 bar (14 N) 3 x pneumatic hose D=4 mm (outside) Low weight Ergonomically designed Dismountable

For 2C material valve version 0001-9800-0000VAV and 0001-9800-0000.

Nozzle to check the mixing ratio (black) in a set with cap nut. White version made of PTFE, black version made of steel and PTFE coated. For material joints version: 0001-9400-0206 0001-9400-0206VA

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (stainless steel) for mixers bell 19.9mm 2 x O-ring 4 x screw for mounting at the material valve

2 rotation axis Connections:M 14x1.5 (outside thread) / 16 S (inside thread) Dismountable For higher outflow rates

2 rotation axis Connections:M 14x1.5 (outside thread) / 25 S (inside thread) Dismountable For higher outflow rates

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (stainless steel) with centre-fed for B-component; recommended for silicone 2 x O-ring 4 x screw for mounting at the material valve

swivel connection with 08S on both sides (incl. nut)

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (steel / galvanized) with long centre-fed for B-component; recommended for silicone 2 x O-ring 4 x screw for mounting at the material valve

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) for mixing ratio 10 : 1 specially for liquid B component 2 x O-ring 4 x screw for mounting at the material valvet

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) for mixing ratio 10:1 incl. B component pin assembled 2 x O-ring 4 x screw for mounting at the material valve

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) for mixing ratio 10 : 1 specially for liquid B component 2 x O-ring 4 x screw for mounting at the material valve

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) for mixing ratio 1 : 1 with high outlet rate 2 x O-ring 4 x screw for mounting at the material valve

The material joint passes the A- and B-component separately into the mixer. For cleaning just remove the mixer and clean the surface of the outlet. Consisting of: 1 x material joint (aluminium) for mixing ratio 10 : 1 2 x O-ring 4 x screw for mounting at the material valve

For material valves version: 0001-9800-0000 and 0001-9450-0000

For 2-component valve 0001-9450-0000.

Nozzle to check the mixing ratio (white version made of PTFE). For material joints version: 0001-9400-0202 0001-9400-0202VA